LBitmap::FTDisplay

#include "ltwrappr.h"

virtual L_INT LBitmap::FTDisplay (pFTArray, uFlags)

This function is used to display the results of a Fast Fourier Transform or a Discrete Fourier analysis as a bitmap.

Parameters

pFTARRAY pFTArray

Pointer to a FTARRAY structure. The acxData member of the FTARRAY structure is a two-dimensional array holding the frequency components. Its dimensions must equal the bitmap dimensions.

L_UINT uFlags

Flags that indicate the data to be shown and the plotting scale. You can use a bit-wise OR ( | ) to specify one flag from each group.

The following flags represent the data to be shown:

Value Meaning
DSP_FT_MAG [0x0001] Plot harmonics magnitude data.
DSP_FT_PHS [0x0002] Plot harmonics phase data.

The following flags represent the plotting scale. These are ignored when DSP_FT_PHS is set:

Value Meaning
DSP_FT_NORM [0x0010] Plot harmonics magnitudes using the normal linear scale.
DSP_FT_LOG [0x0020] Plot harmonics magnitudes using logarithmic scale.

Returns

Value Meaning
SUCCESS The function was successful.
< 1 An error occurred. Refer to Return Codes.

Comments

This function converts the acxData member of the FTARRAY structure computed by LBitmap::FFT or LBitmap::DFT functions into a bitmap. The resulting bitmap may be displayed such that it shows either the frequency harmonics amplitude data or phase data. The (0,0) frequency located in bitmap center, positive X harmonics in the right half and positive Y harmonics located in the lower half of the bitmap.

This function does not work on regions. If a bitmap has a region the function ignores it and processes the entire bitmap.

Bitmap should be allocated prior to calling this function. The size of the bitmap must be the same size as the bitmap that was used to generate acxData or it must have the same width and height of the FTARRAY structure if the transform data was allocated with a padding flag for use with the LBitmap::FFT function.

To update a status bar or detect a user interrupt during execution of this function, refer to LBase::EnableStatusCallback.

This function does not support 12 and 16-bit grayscale and 48 and 64-bit color images. If the image is 12 and 16-bit grayscale and 48 and 64-bit color, the function will not return an error.

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

Platforms

Win32, x64.

See Also

Functions

Topics

Example

L_INT LBitmap__FTDisplayExample(LBitmap *pLeadBitmap, LBitmap *pDisplayBitmap) 
{ 
   /* This example applies the Discrete Fourier Transform function to it, and displays the data*/ 
 
   RECT    rcRange;  
 
   pFTARRAY  pFTArray;  
 
   pDisplayBitmap->Copy(*pLeadBitmap);  
 
   /*Allocates buffer*/ 
 
   pLeadBitmap->AllocFTArray (&pFTArray, sizeof(FTARRAY));  
 
   rcRange.left  = 0;  
 
   rcRange.right = pLeadBitmap->GetWidth () / 4;  
 
   rcRange.top = 0;  
 
   rcRange.bottom = pLeadBitmap->GetHeight () / 2;  
 
   /* apply DFT*/ 
 
   pLeadBitmap->DFT (pFTArray, &rcRange, DFT_DFT | DFT_GRAY | DFT_RANGE| DFT_INSIDE_X| DFT_OUTSIDE_Y);  
 
   /*plot frequency magnitude*/ 
 
   pDisplayBitmap->FTDisplay(pFTArray, DSP_FT_MAG | DSP_FT_LOG);  
 
   LBitmap::FreeFTArray (pFTArray);  
 
   return SUCCESS; 
} 
Help Version 22.0.2021.9.12
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2021 LEAD Technologies, Inc. All Rights Reserved.

LEADTOOLS Raster Imaging C++ Class Library Help