CURVE

typedef struct _CURVE 
{ 
   L_UINT uStructSize; 
   L_INT nType; 
   L_INT nPointCount; 
   L_POINT *pPoints; 
   L_UINT uFillMode; 
   L_DOUBLE dTension; 
   L_INT nClose; 
   L_INT nReserved; 
} CURVE, * pCURVE; 

The CURVE structure defines a curve for the LBitmapRgn::SetRgnCurve function and the LBitmapRgn::CurveToBezier function.

Member Description
uStructSize Size of the structure. This must be set before passing this structure to the LEAD functions.
nType Flag that indicates the type of curve defined. Possible values are:
  Value Meaning
  CURVE_BEZIER The points specified in the pPoints field define a Bezier curve.
  CURVE_STANDARD The points specified in the pPoints field define a standard curve. (Catmull-Rom)
  CURVE_NATURAL_CUBIC_SPLINE The points specified in the pPoints field define a standard curve (Natural Cubic Spline)
nPointCount Number of points in the pPoints array.
  If nType is CURVE_BEZIER, nPointCount must be 3n + 1, where n >= 1. For example, nPointCount can be 4, 7, 10, 13, and so on.
  If nType is CURVE_STANDARD or CURVE_NATURAL_CUBIC_SPLINE, nPointCount must be greater than or equal to 3. For example, nPointCount can be 3, 4, 5, 6, and so on.
pPoints Pointer to an array of L_POINT structures that contain the points that define the curve.
uFillMode Flag that indicates how to handle complex crossing lines. The following are valid values, which are illustrated below:
  Value Meaning
  L_POLY_WINDING [0] All pixels that are inside the resulting exterior lines are in the region.
  L_POLY_ALTERNATE [1] The region includes the area between odd-numbered and even-numbered polygon sides on each scan line.
  image\starcurve8.gif
dTension Value that indicates the "straightness" of the curves that connect points. This value is used only when nType is CURVE_STANDARD. Valid values are between 0.0 and 1.0, where 0.0 indicates straight lines, and 1.0 indicates lines with the highest curvature. A typical value for dTension is 0.5.
  image\Tension.gif
nClose Value that indicates how the curve is closed. This value is used only when nType is CURVE_STANDARD. Possible values are:
  Value Meaning
  CURVE_NO_CLOSE [0x0] For n points, draw (n 3) segments. For example, for points {P0, P1, P2, P3, P4}, draw segments P1P2 and P2P3.
  CURVE_CLOSE [0x1] For n points draw (n) segments. For example, for points {P0, P1, P2, P3, P4}, draw segments P0P1, P1P2, P2P3, P3P4, P4P0.
  CURVE_PARTIAL_CLOSE [0x2] For n points draw (n 1) segments. For example, for points {P0, P1, P2, P3, P4}, draw segments P0P1, P1P2, P2P3, P3P4 (but not P4P0).
  In the following diagram, the resulting region is shown in gray.
 
nReserved Reserved for future use.

Comments

The CURVE structure is used by the LBitmapRgn::SetRgnCurve function to draw a curve using an array of POINT items. It is also used by the LBitmapRgn::CurveToBezier function to convert a curve to a Bezier. The CURVE structure can define three types of curves:

Help Version 19.0.2017.10.27
Products | Support | Contact Us | Copyright Notices
© 1991-2017 LEAD Technologies, Inc. All Rights Reserved.
LEADTOOLS Raster Imaging C++ Class Library Help