C#
Objective-C
C++/CLI
public int MinDensity { get; set; }
@property (nonatomic, assign) NSInteger minDensity;
public:
property int MinDensity {
int get();
void set ( int value);
}
The Min Density (2010,0120).
using Leadtools;
using Leadtools.Dicom;
public class MyDicomPrintSCU : DicomPrintScu
{
public MyDicomPrintSCU(string path) : base(path) { }
public override void OnStatus(DicomPrintScuStatus status, DicomCommandStatusType operationStatus)
{
string statusCodeType = "Unknown";
StringBuilder msg = new StringBuilder();
switch (status)
{
case DicomPrintScuStatus.ReceiveAbort:
DicomPrintScuAbortInformation printSCUAbortInfo = GetAbortInformation();
msg.AppendFormat("Source = {0}, Reason = {1}", printSCUAbortInfo.Source, printSCUAbortInfo.Reason);
Console.WriteLine("Print SCP Aborted the Association: " + msg.ToString());
break;
case DicomPrintScuStatus.ReceivePrintFilmSessionRsp:
DicomCommandStatusType commandStatusType = GetLastOperationStatus();
if (operationStatus == DicomCommandStatusType.Success)
{
if (commandStatusType == DicomCommandStatusType.Success)
{
statusCodeType = "Success";
}
else
{
statusCodeType = "Warning";
}
}
else
{
statusCodeType = "Failure";
}
msg.AppendFormat("Status: 0x{0:X4} {1}", commandStatusType, statusCodeType);
Console.WriteLine($"Received N-ACTION-RSP (Basic Film Session SOP Class): {msg.ToString()}");
break;
}
}
public override void OnPrinterReport(int eventTypeID, DicomPrinterReportInformation reportInfo)
{
StringBuilder msg = new StringBuilder();
string eventTypeName = "Normal";
switch (eventTypeID)
{
case 2:
eventTypeName = "Warning";
break;
case 3:
eventTypeName = "Failure";
break;
}
msg.AppendFormat("Event Type Name: {0}", eventTypeName);
if (eventTypeID != 1 && reportInfo != null)
{
if (reportInfo.PrinterStatusInfo != null)
{
msg.AppendFormat("{0}Printer Status Info: {1}", Environment.NewLine, reportInfo.PrinterStatusInfo);
}
if (reportInfo.FilmDestination != null)
{
msg.AppendFormat("{0}Film Destination: {1}", Environment.NewLine, reportInfo.FilmDestination);
}
if (reportInfo.PrinterName != null)
{
msg.AppendFormat("{0}Printer Name: {1}", Environment.NewLine, reportInfo.PrinterName);
}
}
Console.WriteLine($"Printer Status Report: {msg.ToString()}");
}
public override void OnPrintJobReport(string printJobInstanceUID, int eventTypeID, DicomPrintJobReportInformation reportInfo)
{
StringBuilder msg = new StringBuilder();
msg.AppendFormat("Print Job SOP Instance UID: {0}", printJobInstanceUID);
string eventTypeName = "Pending";
switch (eventTypeID)
{
case 2:
eventTypeName = "Printing";
break;
case 3:
eventTypeName = "Done";
break;
case 4:
eventTypeName = "Failure";
break;
}
msg.AppendFormat("{0}Event Type Name: {1}", Environment.NewLine, eventTypeName);
if (reportInfo != null)
{
if (reportInfo.ExecutionStatusInfo != null)
{
msg.AppendFormat("{0}Execution Status Info: {1}", Environment.NewLine, reportInfo.ExecutionStatusInfo);
}
if (reportInfo.FilmSessionLabel != null)
{
msg.AppendFormat("{0}Film Session Label: {1}", Environment.NewLine, reportInfo.FilmSessionLabel);
}
if (reportInfo.PrinterName != null)
{
msg.AppendFormat("{0}Printer Name: {1}", Environment.NewLine, reportInfo.PrinterName);
}
}
Console.WriteLine($"Print Job Status Report: {msg.ToString()}");
}
};
void PerformBasicPM()
{
//It's assumed that support for medical communication is already unlocked
//Make sure to initialize the DICOM engine, this needs to be done only once
//In the whole application
DicomEngine.Startup();
//Make sure to initialize the DICOM Communication engine, this needs to be done only once
//In the whole application
DicomNet.Startup();
//The DicomPrintSCU is disposable, this is why we are using the "using" keyword
using (MyDicomPrintSCU printSCU = new MyDicomPrintSCU(null))
{
printSCU.SetTimeout(60);
try
{
// Establish the Association
bool ret = printSCU.Associate("10.1.1.209", 7104, "PrintSCP", "PrintSCU",
DicomPrintScuPrintManagementClassFlags.BasicGrayscalePmMetaSopClass |
DicomPrintScuPrintManagementClassFlags.BasicColorPmMetaSopClass |
DicomPrintScuPrintManagementClassFlags.BasicAnnotationBoxSopClass |
DicomPrintScuPrintManagementClassFlags.BasicPrintImageOverlayBoxSopClass |
DicomPrintScuPrintManagementClassFlags.PresentationLutSopClass |
DicomPrintScuPrintManagementClassFlags.PrintJobSopClass |
DicomPrintScuPrintManagementClassFlags.PrinterConfigurationRetrievalSopClass);
//The method will return false if the association was rejected,
//if some other error occurred then an exception will be thrown
if (ret == false)
{
DicomPrintScuAssociateRejectInformation associateRejectInfo = printSCU.GetAssociateRejectInformation();
if (associateRejectInfo != null)
{
StringBuilder msg = new StringBuilder();
msg.AppendFormat("Source = {0}, Reason = {1}", associateRejectInfo.Source, associateRejectInfo.Reason);
Console.WriteLine(msg.ToString());
return;
}
}
// Display some printer info
GetPrinterInfo(printSCU);
// Display some printer configuration info
GetPrinterConfigInfo(printSCU);
// Create a Film Session
DicomFilmSessionParameters filmSessionParameters = printSCU.GetDefaultFilmSessionParameters();
filmSessionParameters.NumberOfCopies = 1;
//Over here we can set some other film session parameters before creating the film session.
//To set these parameters we can access one or more of these properties:
//DicomFilmSessionParameters.NumberOfCopies
//DicomFilmSessionParameters.MemoryAllocation
//DicomFilmSessionParameters.OwnerID
//DicomFilmSessionParameters.PrintPriority
//DicomFilmSessionParameters.MediumType
//DicomFilmSessionParameters.FilmDestination
//DicomFilmSessionParameters.FilmSessionLabel
printSCU.CreateFilmSession(filmSessionParameters, true);
Console.WriteLine($"Film Session SOP Instance UID: {printSCU.GetFilmSessionInstanceUid()}");
// Update the Film Session to specify a "MED" Print Priority
filmSessionParameters = printSCU.GetDefaultFilmSessionParameters();
filmSessionParameters.PrintPriority = "MED";
printSCU.UpdateFilmSession(filmSessionParameters);
DicomFilmBoxParameters filmBoxParameters = printSCU.GetDefaultFilmBoxParameters();
if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.BasicAnnotationBoxSopClass))
{
filmBoxParameters.AnnotationDisplayFormatID = "SomeID";
}
//Over here we can set some other film box parameters before creating the film box.
//To set these parameters we can access one or more of these properties:
//DicomFilmBoxParameters.ImageDisplayFormat
//DicomFilmBoxParameters.FilmOrientation
//DicomFilmBoxParameters.FilmSizeID
//DicomFilmBoxParameters.ConfigurationInformation
//DicomFilmBoxParameters.AnnotationDisplayFormatID
//DicomFilmBoxParameters.SmoothingType
//DicomFilmBoxParameters.BorderDensity
//DicomFilmBoxParameters.EmptyImageDensity
//DicomFilmBoxParameters.Trim
//DicomFilmBoxParameters.RequestedResolutionID
//DicomFilmBoxParameters.MaxDensity
//DicomFilmBoxParameters.MinDensity
//DicomFilmBoxParameters.Illumination
//DicomFilmBoxParameters.ReflectedAmbientLight
//DicomFilmBoxParameters.MagnificationType
// Create a Film Box
printSCU.CreateFilmBox(filmBoxParameters, null);
Console.WriteLine($"Film Box SOP Instance UID: {printSCU.GetFilmBoxInstanceUid()}");
// Create a Presentation LUT
if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.PresentationLutSopClass))
{
// Make sure that you have a valid presentation state dataset,
// otherwise leave this code commented out
/*
using (DicomDataSet presentationLUTDataset = new DicomDataSet())
{
//Load DICOM File
presentationLUTDataset.Load(LeadtoolsExamples.Common.ImagesPath.Path + "plut_Pre.dcm", DicomDataSetLoadFlags.None);
printSCU.CreatePresentationLUT(presentationLUTDataset, null);
string presLUTInstanceUID = printSCU.GetPresentationLutInstanceUid();
if(presLUTInstanceUID != null)
{
Console.WriteLine($"Pres LUT SOP Instance UID: {presLUTInstanceUID}");
printSCU.UpdateFilmBox(null, presLUTInstanceUID);
}
}
*/
}
using (DicomDataSet imageDataset = new DicomDataSet())
{
//Load DICOM File
imageDataset.Load(Path.Combine(LEAD_VARS.ImagesDir, "IMAGE3.dcm"), DicomDataSetLoadFlags.LoadAndClose);
// Update the Image Box. Since the Image Display Format of the Film Box was
// set to "STANDARD\1,1", then we are supposed to have one Image Box created
// by the Print SCP.
if (printSCU.GetImageBoxesCount() > 0)
{
Console.WriteLine($"Image Box SOP Instance UID: {printSCU.GetImageBoxInstanceUid(0)}");
DicomImageBoxParameters imageBoxParameters = printSCU.GetDefaultImageBoxParameters();
imageBoxParameters.ImagePosition = 1;
//Over here we can set some other image box parameters before updating the image box.
//To set these parameters we can access one or more of these properties:
//DicomImageBoxParameters.MinDensity
//DicomImageBoxParameters.MaxDensity
//DicomImageBoxParameters.RequestedImageSize
//DicomImageBoxParameters.Polarity
//DicomImageBoxParameters.MagnificationType
//DicomImageBoxParameters.SmoothingType
//DicomImageBoxParameters.ConfigurationInformation
//DicomImageBoxParameters.RequestedDecimateCropBehavior
printSCU.UpdateImageBox(printSCU.GetImageBoxInstanceUid(0),
imageDataset,
0,
imageBoxParameters,
null,
null);
// We don't need them any more
printSCU.FreeImageBoxesInstanceUids();
}
// Create an overlay box
DicomOverlayBoxParameters overlayBoxParameters = printSCU.GetDefaultOverlayBoxParameters();
//Over here we can set some other overlay box parameters before creating the image overlay box.
//To set these parameters we can access one or more of these properties:
//DicomOverlayBoxParameters.MagnifyToNumberOfColumns
//DicomOverlayBoxParameters.OverlayBackgroundDensity
//DicomOverlayBoxParameters.OverlayForegroundDensity
//DicomOverlayBoxParameters.OverlayMagnificationType
//DicomOverlayBoxParameters.OverlayOriginColumn
//DicomOverlayBoxParameters.OverlayOriginRow
//DicomOverlayBoxParameters.OverlayOrImageMagnification
//DicomOverlayBoxParameters.OverlaySmoothingType
printSCU.CreateOverlayBox(imageDataset, overlayBoxParameters);
Console.WriteLine($"Overlay Box SOP Instance UID: {printSCU.GetOverlayBoxInstanceUid()}");
}
// Update the Annotation Boxes (if there are any)
int annotationBoxCount = printSCU.GetAnnotationBoxesCount();
for (int i = 0; i < annotationBoxCount; i++)
{
printSCU.UpdateAnnotationBox(printSCU.GetAnnotationBoxInstanceUid(i), i + 1, "Some Text");
}
printSCU.FreeAnnotationBoxesInstanceUids(); // We don't need them any more
// Print the Film Session (or the Film Box; there is no difference since we
// have a single Film Box in the Film Session)
printSCU.PrintFilmSession();
// We can also call this
//PrintSCU.PrintFilmBox();
// Display some info about the Print Job
if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.PrintJobSopClass))
{
GetPrintJobInfo(printSCU, printSCU.GetPrintJobInstanceUid());
}
// Delete the Film Box (anyway, it would be deleted when the Film Session
// is deleted)
printSCU.DeleteFilmBox();
// Delete the Film Session
printSCU.DeleteFilmSession();
// We can also call printSCU.DeletePresentationLUT and printSCU.DeleteOverlayBox
// to Delete the Presentation LUT and the Image Overlay Box
}
catch (DicomException ex)
{
Console.WriteLine(string.Format("An error occurred, code: {0}", ex.Code));
return;
}
finally
{
// Release the Association and close the connection
printSCU.Release();
}
}
DicomNet.Shutdown();
DicomEngine.Shutdown();
}
void GetPrinterInfo(DicomPrintScu printSCU)
{
// Query the Print SCP for the information
try
{
DicomPrinterInformation printerInfo = printSCU.GetPrinterInformation(null, true);
StringBuilder msg = new StringBuilder();
msg.AppendFormat("Printer Status: {0}{2}Printer Status Info: {1}", printerInfo.PrinterStatus, printerInfo.PrinterStatusInfo, Environment.NewLine);
//Over here we can also investigate other printer information by accessing the following
//properties from the DicomPrinterInformation class: TimeOfLastCalibration, DateOfLastCalibration,
//SoftwareVersions, DeviceSerialNumber, ManufacturerModelName , Manufacturer, CreationDate, and CreationTime.
Console.WriteLine($"Printer Info: {msg.ToString()}");
}
catch (DicomException ex)
{
Console.WriteLine(string.Format("Failed to get printer information, Error code: {0}", ex.Code));
}
}
void GetPrinterConfigInfo(DicomPrintScu printSCU)
{
// Assume that the Association is already established
try
{
// Query the Print SCP for the printer configuration information
DicomDataSet printerConfiguration = printSCU.GetPrinterConfiguration();
// We will display only the Printer Name and Memory Bit Depth
// in the first Item
DicomElement element = printerConfiguration.FindFirstElement(null, DicomTag.PrinterConfigurationSequence, false);
if (element == null)
return;
element = printerConfiguration.GetChildElement(element, true);
if (element == null)
return;
element = printerConfiguration.GetChildElement(element, true);
if (element == null)
return;
StringBuilder msg = new StringBuilder();
msg.Append("Printer Name: ");
DicomElement printerName = printerConfiguration.FindFirstElement(element, DicomTag.PrinterName, true);
if (printerName != null)
{
string name = printerConfiguration.GetStringValue(printerName, 0);
if (name != null)
{
msg.AppendFormat("{0}{1}", name, Environment.NewLine);
}
else
{
msg.AppendFormat("N/A{0}", Environment.NewLine);
}
}
msg.Append("Memory Bit Depth: ");
DicomElement memoryBitDepth = printerConfiguration.FindFirstElement(element, DicomTag.MemoryBitDepth, true);
if (memoryBitDepth != null)
{
short[] value = printerConfiguration.GetShortValue(memoryBitDepth, 0, 1);
if (value.Length > 0)
{
msg.AppendFormat("{0}", value[0]);
}
else
{
msg.Append("N/A");
}
}
Console.WriteLine($"Printer Config Info: {msg.ToString()}");
}
catch (DicomException ex)
{
Console.WriteLine(string.Format("Failed to get Printer Configuration Info, Error code: {0}", ex.Code));
}
}
void GetPrintJobInfo(DicomPrintScu printSCU, string printJobInstanceUID)
{
// Query the Print SCP for the Print Job information
try
{
DicomPrintJobInformation printJobInfo = printSCU.GetPrintJobInformation(printJobInstanceUID, null);
StringBuilder msg = new StringBuilder();
msg.AppendFormat("Execution Status: {0}{2}Execution Status Info: {1}",
printJobInfo.ExecutionStatus,
printJobInfo.ExecutionStatusInfo,
Environment.NewLine);
Console.WriteLine($"Print Job Info: {msg.ToString()}");
}
catch (DicomException ex)
{
Console.WriteLine(string.Format("Failed to get Print Job information, Error code: {0}", ex.Code));
}
}
static class LEAD_VARS
{
public const string ImagesDir = @"C:\LEADTOOLS23\Resources\Images";
}