L_WaveBitmap

#include "l_bitmap.h"

L_LTIMGSFX_API L_INT L_WaveBitmap(pBitmap, uAmplitude, uWaveLen, nAngle, uHorzFact, uVertFact, crFill, uFlags)

Distorts the bitmap with two perpendicular waves at the specified angle and with the specified wave type.

Parameters

pBITMAPHANDLE pBitmap

Pointer to the bitmap handle that references the bitmap on which to apply the effect.

L_UINT uAmplitude

Waves magnitude. The values range from 1 to the length of the image's diagonal.

L_UINT uWaveLen

Value that represents the wave length, if DIS_PER is set in the uFlags parameter. Possible values range from 1 - 100 and give the wavelength as a percentage of the bitmap dimensions. If DIS_FRQ is set in uFlags, this value is the number of repeated waves.

L_INT nAngle

Waves rotation angle in hundredths of degrees. The valid range is from -18000 to 18000 (The value in degrees is nAngle divided by 100).

L_UINT uHorzFact

Size of the horizontal wave, given as a percentage. The valid range is from 0 to 100.

L_UINT uVertFact

Size of the vertical wave, given as a percentage. The valid range is from 0 to 100.

COLORREF crFill

The COLORREF value that specifies the fill color for any exposed areas. You can specify a COLORREF value, such as the return value of the Windows RGB macro, or you can use the PALETTEINDEX macro to specify a palette color.

L_UINT uFlags

Flags that indicate how to handle exposed areas, the type of information in the uWaveLen parameter and the wave type. You can use a bitwise OR (|) to specify one flag from each group.

The following are the flags that indicate how to handle exposed areas:

Value Meaning
FILL_CLR [0x0000] Fill any exposed areas with crFill.
FILL_RPT [0x0001] Stretch the image edges to fill the exposed area.
FILL_NOCHG [0x0002] Leave the exposed area as is, without changing it.

The following are the flags that indicate the type of information in the uWaveLen parameter:

Value Meaning
DIS_PER [0x0000] The value in uWaveLen is a wavelength given as a percent of the bitmap dimensions. If this value is used, the valid range of uWaveLen is from 0 to 100.
DIS_FRQ [0x0010] The value in uWaveLen is the frequency, or the number of times the wave repeats.

The following are the flags that indicate the wave type:

Value Meaning
WV_SIN [0x0000] The wave is a sinusoidal wave.
WV_COS [0x0100] The wave is a sinusoidal wave shifted by 90 degrees.
WV_SQUARE [0x0200] The wave is a square wave.
WV_TRIANG [0x0300] The wave is a triangular wave.

Returns

Value Meaning
SUCCESS The function was successful.
< 1 An error occurred. Refer to Return Codes.

Comments

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

The function applies two perpendicular waves. The uHorzFact and uVertFact parameters control the size of these waves.

If the bitmap has a region, the effect will be applied on the region only.

This function supports 12- and 16-bit grayscale and 48- and 64-bit color images. Support for 12- and 16-bit grayscale and 48- and 64-bit color images is available in the Document and Medical Imaging toolkits.

To update a status bar or detect a user interrupt during execution of this function, refer to L_SetStatusCallback.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

Platforms

Win32, x64.

See Also

Functions

Topics

Example

L_INT WaveBitmapExample(L_VOID) 
{ 
   L_INT nRet; 
   BITMAPHANDLE LeadBitmap;   /* Bitmap handle for the image */ 
 
   /* Load a bitmap at its own bits per pixel  */ 
   nRet = L_LoadBitmap(MAKE_IMAGE_PATH(TEXT("sample5.cmp")), &LeadBitmap, sizeof(BITMAPHANDLE), 0, ORDER_BGR, NULL, NULL); 
   if(nRet !=SUCCESS) 
      return nRet; 
 
   /* apply sinusoidal waves on the image*/ 
   nRet = L_WaveBitmap(&LeadBitmap, 20, 25, 0, 100 , 100, 0, FILL_RPT | DIS_PER | WV_SIN); 
   if(nRet !=SUCCESS) 
      return nRet; 
   nRet = L_SaveBitmap(MAKE_IMAGE_PATH(TEXT("Result.BMP")), &LeadBitmap, FILE_BMP, 24, 0, NULL); 
   if(nRet !=SUCCESS) 
      return nRet; 
   //free bitmap  
   if(LeadBitmap.Flags.Allocated)   
      L_FreeBitmap(&LeadBitmap);   
   return SUCCESS; 
} 
Help Version 20.0.2020.6.17
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2020 LEAD Technologies, Inc. All Rights Reserved.

LEADTOOLS Raster Imaging C API Help