L_DicomGetPeerAuthDataISCL

#include "ltdic.h"

L_LTDIC_API L_UINT32 L_DicomGetPeerAuthDataISCL(hNet, pBuffer, nLength)

Gets the authentication data the peer computer sent during mutual authentication. This function is available in the PACS Imaging toolkits.

Parameters

HDICOMNET hNet

Handle to an existing DICOM Network. This is the handle returned from the L_DicomCreateNet function.

L_VOID *pBuffer

Pointer to a buffer to be updated with the authentication data of the peer computer. This buffer must be 128 bytes long to hold the longest possible authentication data.

L_UINT32 *nLength

Pointer to an integer variable. This variable contains initially the size of the pBuffer array. After this function returns, it is updated with the actual size of the peer authentication data.

Returns

Value Meaning
DICOM_SUCCESS Success. The peer authentication data were copied into pBuffer and the variable pointed to by nLength was updated with the length of the authentication data.
DICOM_ERROR_PARAMETER A parameter error occurred. The authentication data could not be retrieved. (pBuffer is NULL, or the value pointed to by nLength is not large enough to contain the entire peer authentication data.). Refer to Return Codes.

Comments

If pBuffer is NULL or the value pointed to by nLength (size of pBuffer) is too small for the peer authentication data, the return value is DICOM_ERROR_PARAMETER and *nLength is updated with the required length of the peer authentication data. No other actions are performed.

The receiver of a message can only call this function, if the message is not successfully received.

Required DLLs and Libraries

Platforms

Win32, x64.

See Also

Functions

Topics

Example

L_INT DicomGetPeerAuthDataISCLExample(L_VOID) 
{ 
   // After a successful connect 
   HDICOMNET hNet = NULL; 
   L_TCHAR peerAuthData[128]; 
   L_UINT32 n = 128; 
   L_INT nRet; 
 
   hNet = L_DicomCreateNetExt(MAKE_IMAGE_PATH(TEXT("")),DICOM_SECURE_ISCL, NULL); 
 
   nRet = L_DicomGetPeerAuthDataISCL(hNet, peerAuthData, &n); 
   if (nRet != DICOM_SUCCESS) 
      return nRet; 
 
   L_TCHAR strMsg[200]; 
   wsprintf(strMsg, TEXT("Connected with the peer identified by: %s\n"), peerAuthData); 
   MessageBox(NULL, strMsg, TEXT(""), MB_OK); 
   return DICOM_SUCCESS; 
}; 
Help Version 20.0.2019.9.20
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2019 LEAD Technologies, Inc. All Rights Reserved.

LEADTOOLS DICOM C API Help