←Select platform

CombineWarpCommand Class

Summary

Combines image data from the source image (the slave) and the destination image (the master), using a perspective warp.

Syntax

C#
VB
Objective-C
WinRT C#
C++
public class CombineWarpCommand : RasterCommand 
Public Class CombineWarpCommand  
   Inherits Leadtools.Imageprocessing.RasterCommand 
   Implements Leadtools.Imageprocessing.IRasterCommand  
public sealed class CombineWarpCommand : Leadtools.Imageprocessing.IRasterCommand   
@interface LTCombineWarpCommand : LTRasterCommand 
function Leadtools.ImageProcessing.CombineWarpCommand() 

Remarks

You can warp the entire source image, or a portion of the source image. To warp a portion of the source image, set SourceRectangle accordingly. To warp the entire source image, set the following:

CombineWarp.Command.SourceRectangle = new LeadRect(0, 0, RasterImage.Width, RasterImage.Height);

The warp area in the destination image is specified in SetDestinationPoints. The polygon specified in SetDestinationPoints must:

  • Be concave
  • Fit entirely on the destination bitmap

If either of these conditions is false, this class will throw an exception.

The ordering of the points in SetDestinationPoints can affect the resulting warp. For example, if the source image is the following:

then ordering the points in SetDestinationPoints as shown below results in the following warp:

while ordering the points in SetDestinationPoints as shown below, results in the following warp:

The CombineWarpCommand works by combining the image in the DestinationImage property with the image passed to the Run method. The DestinationImage will then hold the result of the combine operation..

For more information, refer to Introduction to Image Processing With LEADTOOLS.

This command does not support signed data images.

Example

This example will warp combines two images.

C#
VB
Silverlight C#
Silverlight VB
using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing; 
using LeadtoolsExamples.Common; 
 
public void CombineWarpCommandExample() 
{ 
   RasterCodecs codecs = new RasterCodecs(); 
 
   string srcFileName1 = Path.Combine(ImagesPath.Path, "Image1.cmp"); 
   string srcFileName2 = Path.Combine(ImagesPath.Path, "Image2.cmp"); 
   string destFileName = Path.Combine(ImagesPath.Path, "CombineWarpCommand.bmp"); 
 
   // Load the source images from disk 
   RasterImage parentImage = codecs.Load(srcFileName1); 
   RasterImage childImage = codecs.Load(srcFileName2); 
 
   // Combine them 
   CombineWarpCommand command = new CombineWarpCommand(); 
 
   LeadPoint[] destPoints = 
   { 
      new LeadPoint(100,100), 
      new LeadPoint(200,75), 
      new LeadPoint(200,250), 
      new LeadPoint(100,200) 
   }; 
 
   command.DestinationImage = parentImage; 
   command.SetDestinationPoints(destPoints); 
   command.SourceRectangle = new LeadRect(0, 0, childImage.Width, childImage.Height); 
   command.Flags = CombineWarpCommandFlags.Bilinear; 
   command.Run(childImage); 
 
   // Save it to disk 
   codecs.Save(parentImage, destFileName, RasterImageFormat.Bmp, 24); 
 
   // Clean Up 
   parentImage.Dispose(); 
   childImage.Dispose(); 
   codecs.Dispose(); 
} 
Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.ImageProcessing 
 
Public Sub CombineWarpCommandExample() 
   Dim codecs As RasterCodecs = New RasterCodecs() 
 
   Dim srcFileName1 As String = Path.Combine(LEAD_VARS.ImagesDir, "Image1.cmp") 
   Dim srcFileName2 As String = Path.Combine(LEAD_VARS.ImagesDir, "Image2.cmp") 
   Dim destFileName As String = Path.Combine(LEAD_VARS.ImagesDir, "CombineWarpCommand.bmp") 
 
   ' Load the source images from disk 
   Dim parentImage As RasterImage = codecs.Load(srcFileName1) 
   Dim childImage As RasterImage = codecs.Load(srcFileName2) 
 
   ' Combine them 
   Dim command As CombineWarpCommand = New CombineWarpCommand() 
 
   Dim destPoints As LeadPoint() = {New LeadPoint(100, 100), New LeadPoint(200, 75), New LeadPoint(200, 250), New LeadPoint(100, 200)} 
 
   command.DestinationImage = parentImage 
   command.SetDestinationPoints(destPoints) 
   command.SourceRectangle = New LeadRect(0, 0, childImage.Width, childImage.Height) 
   command.Flags = CombineWarpCommandFlags.Bilinear 
   command.Run(childImage) 
 
   ' Save it to disk 
   codecs.Save(parentImage, destFileName, RasterImageFormat.Bmp, 24) 
 
   ' Clean Up 
   parentImage.Dispose() 
   childImage.Dispose() 
End Sub 
 
Public NotInheritable Class LEAD_VARS 
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images" 
End Class 
using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.Examples; 
using Leadtools.ImageProcessing; 
using Leadtools.Windows.Media; 
 
//public void CombineWarpCommandExample(RasterImage parentImage, RasterImage childImage, Stream destStream) 
//{ 
//   RasterCodecs codecs = new RasterCodecs(); 
 
//   // Combine them 
//   CombineWarpCommand command = new CombineWarpCommand(); 
 
//   Point[] destPoints = 
//   { 
//      new Point(100,100), 
//      new Point(200,75), 
//      new Point(200,250), 
//      new Point(100,200) 
//   }; 
 
//   command.DestinationImage = parentImage; 
//   command.SetDestinationPoints(destPoints); 
//   command.SourceRectangle = new LeadRect(0, 0, childImage.Width, childImage.Height); 
//   command.Flags = CombineWarpCommandFlags.Bilinear; 
//   command.Run(childImage); 
 
//   // Save it to disk 
//   codecs.Save(parentImage, destStream, RasterImageFormat.Bmp, 24); 
 
//   // Clean Up 
//   parentImage.Dispose(); 
//   childImage.Dispose(); 
//} 
Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.ImageProcessing 
Imports Leadtools.Windows.Media 
 
'public void CombineWarpCommandExample(RasterImage parentImage, RasterImage childImage, Stream destStream) 
'{ 
'   RasterCodecs codecs = new RasterCodecs(); 
 
'   // Combine them 
'   CombineWarpCommand command = new CombineWarpCommand(); 
 
'   Point[] destPoints = 
'   { 
'      new Point(100,100), 
'      new Point(200,75), 
'      new Point(200,250), 
'      new Point(100,200) 
'   }; 
 
'   command.DestinationImage = parentImage; 
'   command.SetDestinationPoints(destPoints); 
'   command.SourceRectangle = new LeadRect(0, 0, childImage.Width, childImage.Height); 
'   command.Flags = CombineWarpCommandFlags.Bilinear; 
'   command.Run(childImage); 
 
'   // Save it to disk 
'   codecs.Save(parentImage, destStream, RasterImageFormat.Bmp, 24); 
 
'   // Clean Up 
'   parentImage.Dispose(); 
'   childImage.Dispose(); 
'} 

Requirements

Target Platforms

Help Version 19.0.2017.10.19
Products | Support | Contact Us | Copyright Notices
© 1991-2017 LEAD Technologies, Inc. All Rights Reserved.

Leadtools Assembly