←Select platform
In This Topic ▼

Leadtools.ImageProcessing.SpecialEffects Classes

Summary

Overview and description of Leadtools ImageProcessing SpecialEffects classes.

Classes
Class Description
Class
AgingCommand Adds effects that simulate random color changes, scratches, dust and pits, making an image look like it was made from an old film. This command is available in the Imaging Pro and above toolkits.
Class BendCommand Warps the active image along a curved plane, centered on the pivot point. This command is available in the Imaging Pro and above toolkits.
Class BricksTextureCommand Creates a brick texture that makes the image look like it has been drawn on a brick wall. This command is available in the Imaging Pro and above toolkits.
Class BumpMapCommand Adds a three-dimensional texture pattern created by applying the bump image to the affected image. This command is available in the Imaging Pro and above toolkits.
Class CanvasCommand Combines two images, superimposing one image on another image that is used like a canvas. This command is available in the Imaging Pro and above toolkits.
Class CloudsCommand Applies cloud effects to a bitmap. Imaging Pro and above toolkits include this commant.
Class ColoredBallsCommand Throws colored balls over the image. The resulting color of the ball is a combination of ball color and the color of the pixel where it has fallen with certain opacity. Various parameters control the color and appearance of the balls.
Class ColoredPencilCommand Applies an effect to an image that makes it look like it has been drawn with colored pencils. This method is available in the Imaging Pro and above toolkits.
Class ColoredPencilExtendedCommand Applies an effect to a bitmap that makes it look like it has been drawn with colored pencils. This method is available in the Imaging Pro and above toolkits.
Class CylinderCommand Warps the image around a cylinder. This command is available in the Imaging Pro and above toolkits.
Class DiceEffectCommand Splits the image into square or rectangular blocks. If the blocks are square, the command rotates each block by 0, 90, 180, or 270 degrees. If the blocks are rectangular, the command flips the blocks around the X-axis or Y-axis. This command is available in the Imaging Pro and above toolkits.
Class DiffuseGlowCommand Adds a colored glow to an image's light or dark areas, making these areas shine with a neon glow. This method is available in the Imaging Pro and above toolkits
Class DrawStarCommand Draws a star on the image. This command is available in the Imaging Pro and above toolkits.
Class DryCommand Simulates painting an image with the watercolor dry brush technique. This command is available in the Imaging Pro and above toolkits.
Class FragmentCommand Averages an image with its shifted copies. This method is available in the Imaging Pro and above toolkits. This method creates four copies of an image. Each copy is shifted by the offset amount into one of the four directions: top, left, bottom and right. Then the image is averaged with its shifted copies.
Class FreeHandShearCommand Shears the image by the wave drawn using the amplitudes array. This command is available in the Imaging Pro and above toolkits.
Class FreeHandWaveCommand Distorts the image by the wave specified in the amplitudes array and the rotation angle. This command is available in the Imaging Pro and above toolkits.
Class FreePlaneBendCommand Wraps the image onto a 3D plane shaped by Curve. This command is available in the Imaging Pro and above toolkits.
Class FreeRadialBendCommand Wraps the image along its radius on a 3D surface shaped by Curve. This command is available in the Imaging Pro and above toolkits.
Class FunctionalLightCommand Adds light to the image according to a function-based distribution. This light will be generated by one of the following methods: linear, quadratic, sine, cosine, or using freehand points. This method is available in the Imaging Pro and above toolkits.
Class GlassEffectCommand Divides the image into rectangular cells and makes it look as if it is being viewed through glass blocks. This command is available in the Document/Medical and above toolkits.
Class GlowCommand Makes the colored edges shine with a neon glow. This command is available in the Imaging Proo and above toolkits.
Class ImpressionistCommand Makes the image look like it was painted by an impressionist painter. This command is available in the Imaging Pro and above toolkits.
Class IntelligentDownScaleCommand Automatically reduces image size while preserving important features. It can also remove or preserve certain objects chosen by the user without affecting the natural look of the image.
Class IntelligentUpScaleCommand Automatically increases image size while preserving important features. It can also preserve certain objects chosen by the user without affecting the natural look of the image.
Class LensFlareCommand Simulates the secondary reflections caused when bright lights are facing the camera lens. The lens flare is refracted into a series of lightened circles that surround the flare. This method is available in the Imaging Pro and above toolkits.
Class LightCommand Adds many spots of directed light sources to the image. This command is available in the Imaging Pro and above toolkits.
Class MosaicTilesCommand Creates a mosaic effect on an image by dividing an image into rectangular or arc-shaped cells with irregular boundaries and modifying the color of each cell. This method is available in the Imaging Pro and above toolkits.
Class OceanCommand Reflects the image on an ocean surface. This command is available in the Imaging Proo and above toolkits.
Class PerlinCommand Uses a pseudo-random number generator in order to create a Perlin noise, and then procedurally transforms that noise into a texture. This command is available in the Imaging Pro and above toolkits.
Class PerspectiveCommand Gives the image a 3-D depth, as if it exists on a flat plane skewed into different shapes. This command is available in the Imaging Pro and above toolkits.
Class PixelateCommand Divides the image into rectangular or circular cells and then recreates the image by filling those cells with the minimum, maximum, or average pixel value, depending upon the effect that was selected. This command is available in the Imaging Pro and above toolkits.
Class PlaneBendCommand Places the image on parallel planes along the Z-axis, and bends the planes toward the center point. This command is available in the Imaging Pro and above toolkits.
Class PlaneCommand Places the image on parallel planes along the Z-axis. This command is available in the Imaging Pro and above toolkits.
Class PlasmaCommand Applies color patterns that blend into each other like plasma. This command is available in the Imaging Pro and above toolkits.
Class PointillistCommand Converts image colors into randomly placed dots to create a pointillist painting. This command is available in the Imaging Pro and above toolkits.
Class PolarCommand Converts the image from rectangular to polar coordinates and vice versa. This command is available in the Imaging Pro and above toolkits.
Class PunchCommand Warps the image by pinching it toward the center or expanding the image away from its center. This command is available in the Imaging Pro and above toolkits.
Class PuzzleEffectCommand Splits the image into square blocks and randomizes these blocks inside the image. This command is available in the Imaging Pro and above toolkits.
Class RadialBlurCommand Blurs the image by rotating the pixels around the center point. This command is available in the Imaging Pro and above toolkits.
Class RadialWaveCommand Distorts the image using a wave radiating from the center. This command is available in the Imaging Pro and above toolkits.
Class RevEffectCommand Adds a pseudo-3D wave effect to the image by drawing lines across the image, basing the line's height at each point on its brightness at that point. This command is available in the Imaging Pro and above toolkits.
Class RingEffectCommand Divides the image into the specified number of rings. Each ring is rotated according to a rotation angle. The rotation angle for each ring will be chosen randomly by the command or can be passed to the command. This command is available in the Imaging Pro and above toolkits.
Class RippleCommand Warps the image in concentric rings. This command is available in the Imaging Pro and above toolkits.
Class RomanMosaicCommand Segments the image into rectangular or rounded rectangular tiles and fills them with a color chosen randomly from the colors of the tile's pixels. This method is available in the Imaging Pro and above toolkits.
Class ShadowCommand Adds shadows to the image. This command is available in the Imaging Pro and above toolkits.
Class SphereCommand Warps the image around a 3D spherical shape. This command is available in the Imaging Pro and above toolkits.
Class SwirlCommand Spins the image according to the rotation angle to produce a swirl pattern. This command is available in the Imaging Pro and above toolkits.
Class TunnelCommand Places the image inside a tunnel along the Z-axis. This command is available in the Imaging Pro and above toolkits.
Class VignetteCommand Draws a specified shape and feathers it to the image. This method is available in the Imaging Pro and above toolkits.
Class WaveCommand Distorts the image with two perpendicular waves at the specified angle and with the specified wave type. This command is available in the Imaging Pro and above toolkits.
Class WindCommand Creates thin lines, directed along the specified angle, on the affected image. This method is available in the Imaging Pro and above toolkits.
Class ZigZagCommand Radially distorts the image by creating waves that twist the image around a specified center. This command is available in the Imaging Pro and above toolkits.
Class ZoomBlurCommand Blurs the image along radial lines starting from a specific center point. This command is available in the Imaging Pro and above toolkits.
Class ZoomWaveCommand Distorts the image with a wave zoomed from the specified center. This command is available in the Imaging Pro and above toolkits.
Help Version 20.0.2020.3.31
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2020 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.ImageProcessing.SpecialEffects Assembly