SaveRegion(string,int,int,MedicalViewerFileOperation) Method

Summary

Saves cell regions to a file.

Syntax
C#
VB
C++
public void SaveRegion( 
   string fileName, 
   int subCellIndex, 
   int startPage, 
   MedicalViewerFileOperation operation 
) 
  
Public Overloads Sub SaveRegion( _ 
   ByVal fileName As String, _ 
   ByVal subCellIndex As Integer, _ 
   ByVal startPage As Integer, _ 
   ByVal operation As MedicalViewerFileOperation _ 
)  
            public: 
void SaveRegion(  
   String^ fileName, 
   int subCellIndex, 
   int startPage, 
   MedicalViewerFileOperation operation 
)  

Parameters

fileName
A string that contains the path to the file to which to save the region.

subCellIndex
The zero-based index of the sub-cell that contains the image which is having its regions saved.

startPage
The page number of a multi-page file, which can contain more than one region. When saving a file, any value greater than the total number of pages will cause the saved region to be appended to the end of the file.

operation
An enumerated MedicalViewerFileOperation value that indicates the operation to be taken on the file when saving a region.

Remarks

Example
C#
VB
using Leadtools; 
using Leadtools.Drawing; 
using Leadtools.Codecs; 
using Leadtools.MedicalViewer; 
using Leadtools.ImageProcessing; 
using Leadtools.Annotations.Engine; 
using Leadtools.Annotations.Designers; 
using Leadtools.Annotations.Rendering; 
 
class MedicalViewerForm7 : Form 
{ 
   private MedicalViewer _medicalViewer; 
 
   void MedicalViewerForm_SizeChanged(object sender, EventArgs e) 
   { 
      _medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom); 
   } 
 
   public MedicalViewerForm7() 
   { 
      RasterCodecs _codecs = new RasterCodecs(); 
      RasterImage _image; 
 
      this.SizeChanged += new EventHandler(MedicalViewerForm_SizeChanged); 
 
      // Create the medical viewer and adjust the size and the location. 
      _medicalViewer = new MedicalViewer(1, 2); 
      _medicalViewer.Location = new Point(0, 0); 
      _medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom); 
 
      // Load an image and then add it to the control. 
      _image = _codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "xa.dcm")); 
      MedicalViewerMultiCell cell = new MedicalViewerMultiCell(_image, true, 1, 1); 
      _medicalViewer.Cells.Add(cell); 
 
      // add some actions that will be used to change the properties of the images inside the control. 
      cell.AddAction(MedicalViewerActionType.WindowLevel); 
      cell.AddAction(MedicalViewerActionType.Alpha); 
      cell.AddAction(MedicalViewerActionType.Offset); 
 
      // assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active); 
      cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active); 
      cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active); 
 
      // adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448"); 
      _medicalViewer.Cells[0].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame); 
      _medicalViewer.Cells[0].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale); 
      _medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData); 
      _medicalViewer.Cells[0].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView); 
 
 
      // Load another image and then add it to the control. 
      _image = _codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "mr.dcm")); 
      _medicalViewer.Cells.Add(new MedicalViewerMultiCell(_image, true, 2, 2)); 
 
      // add some actions that will be used to change the properties of the images inside the control. 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.WindowLevel); 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.Alpha); 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.Offset); 
 
      // assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active); 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active); 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active); 
 
      // adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells[1].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448"); 
      _medicalViewer.Cells[1].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame); 
      _medicalViewer.Cells[1].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale); 
      _medicalViewer.Cells[1].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData); 
      _medicalViewer.Cells[1].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView); 
 
 
      Controls.Add(_medicalViewer); 
      _medicalViewer.Dock = DockStyle.Fill; 
   } 
   public MedicalViewer Viewer 
   { 
      get { return _medicalViewer; } 
   } 
} 
MedicalViewerForm7 GetMedicalControl7() 
{ 
   return new MedicalViewerForm7(); 
} 
 
// This example will create a bitmap region on the first frame of the first image and save it. 
public void MedicalViewerSaveRegionExample() 
{ 
   MedicalViewerForm7 myForm = GetMedicalControl7(); 
   MedicalViewer medicalViewer = myForm.Viewer; 
   MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(medicalViewer.Cells[0]); 
 
   int width = cell.Image.Width; 
   int height = cell.Image.Height; 
   int centerX = (width / 2); 
   int centerY = (height / 2); 
 
   Region region = new Region(new Rectangle(centerX - width / 4, centerY - height / 4, centerX + width / 4, centerY + height / 4)); 
 
   RasterRegionConverter.AddGdiPlusDataToRegion(cell.Image, null, region.GetRegionData(), RasterRegionCombineMode.Set); 
   cell.SaveRegion(Path.Combine(LEAD_VARS.ImagesDir, "Out_Test.rgn")); 
 
   myForm.ShowDialog(); 
} 
 
 
static class LEAD_VARS 
{ 
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images"; 
} 
Imports Leadtools 
Imports Leadtools.Drawing 
Imports Leadtools.Codecs 
Imports Leadtools.MedicalViewer 
Imports Leadtools.ImageProcessing 
Imports Leadtools.Annotations.Engine 
Imports Leadtools.Annotations.Designers 
Imports Leadtools.Annotations.Rendering 
 
Private Class MedicalViewerForm7 : Inherits Form 
   Private _medicalViewer As MedicalViewer 
 
   Private Sub MedicalViewerForm_SizeChanged(ByVal sender As Object, ByVal e As EventArgs) 
      _medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom) 
   End Sub 
 
   Public Sub New() 
      Dim _codecs As RasterCodecs = New RasterCodecs() 
      Dim _image As RasterImage 
 
      AddHandler SizeChanged, AddressOf MedicalViewerForm_SizeChanged 
 
      ' Create the medical viewer and adjust the size and the location. 
      _medicalViewer = New MedicalViewer(1, 2) 
      _medicalViewer.Location = New Point(0, 0) 
      _medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom) 
 
      ' Load an image and then add it to the control. 
      _image = _codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "xa.dcm")) 
      Dim cell As MedicalViewerMultiCell = New MedicalViewerMultiCell(_image, True, 1, 1) 
      _medicalViewer.Cells.Add(cell) 
 
      ' add some actions that will be used to change the properties of the images inside the control. 
      cell.AddAction(MedicalViewerActionType.WindowLevel) 
      cell.AddAction(MedicalViewerActionType.Alpha) 
      cell.AddAction(MedicalViewerActionType.Offset) 
 
      ' assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active) 
      cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active) 
      cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active) 
 
      ' adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448") 
      _medicalViewer.Cells(0).SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame) 
      _medicalViewer.Cells(0).SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale) 
      _medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData) 
      _medicalViewer.Cells(0).SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView) 
 
 
      ' Load another image and then add it to the control. 
      _image = _codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "mr.dcm")) 
      _medicalViewer.Cells.Add(New MedicalViewerMultiCell(_image, True, 2, 2)) 
 
      ' add some actions that will be used to change the properties of the images inside the control. 
      _medicalViewer.Cells(1).AddAction(MedicalViewerActionType.WindowLevel) 
      _medicalViewer.Cells(1).AddAction(MedicalViewerActionType.Alpha) 
      _medicalViewer.Cells(1).AddAction(MedicalViewerActionType.Offset) 
 
      ' assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      _medicalViewer.Cells(1).SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active) 
      _medicalViewer.Cells(1).SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active) 
      _medicalViewer.Cells(1).SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active) 
 
      ' adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells(1).SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448") 
      _medicalViewer.Cells(1).SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame) 
      _medicalViewer.Cells(1).SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale) 
      _medicalViewer.Cells(1).SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData) 
      _medicalViewer.Cells(1).SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView) 
 
 
      Controls.Add(_medicalViewer) 
      _medicalViewer.Dock = DockStyle.Fill 
   End Sub 
   Public ReadOnly Property Viewer() As MedicalViewer 
      Get 
         Return _medicalViewer 
      End Get 
   End Property 
End Class 
Private Function GetMedicalControl7() As MedicalViewerForm7 
   Return New MedicalViewerForm7() 
End Function 
 
' This example will create a bitmap region on the first frame of the first image and save it. 
Public Sub MedicalViewerSaveRegionExample() 
   Dim myForm As MedicalViewerForm7 = GetMedicalControl7() 
   Dim medicalViewer As MedicalViewer = myForm.Viewer 
   Dim cell As MedicalViewerMultiCell = CType(medicalViewer.Cells(0), MedicalViewerMultiCell) 
 
   Dim width As Integer = cell.Image.Width 
   Dim height As Integer = cell.Image.Height 
   Dim centerX As Integer = (width \ 2) 
   Dim centerY As Integer = (height \ 2) 
 
   Dim region As Region = New Region(New Rectangle(centerX - width \ 4, centerY - height \ 4, centerX + width \ 4, centerY + height \ 4)) 
 
   RasterRegionConverter.AddGdiPlusDataToRegion(cell.Image, Nothing, region.GetRegionData(), RasterRegionCombineMode.Set) 
   cell.SaveRegion(Path.Combine(LEAD_VARS.ImagesDir, "Test.rgn")) 
 
   myForm.ShowDialog() 
End Sub 
 
 
Public NotInheritable Class LEAD_VARS 
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images" 
End Class 

Requirements

Target Platforms

Help Version 20.0.2019.9.19
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2019 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.MedicalViewer Assembly