Planes Property

Summary

Gets the oblique MPR planes used to show the object data when it is rendered.

Syntax
C#
VB
C++
public Medical3DMPRPlane[] Planes { get; } 
  
Public ReadOnly Property Planes As Medical3DMPRPlane() 
public: 
property array<Medical3DMPRPlane^>^ Planes { 
   array<Medical3DMPRPlane^>^ get(); 
} 

Property Value

An array of Medical3DPlane that represents an array of oblique MPR planes.

Remarks
  • These planes differ from the orthogonal planes that are shown by default. The orthogonal planes can be accessed through the AxialPlane, SagittalPlane and CoronalPlane properties.
  • This array consist of 3 planes. These planes are all hidden by default. To make them visible, use the Medical3DMPRPlane.Enabled property.

Example
C#
VB
using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.MedicalViewer; 
using Leadtools.Medical3D; 
 
public void Medical3DControlExample() 
{ 
   Medical3DLoadDICOMSeriesExamples LoadObject = new Medical3DLoadDICOMSeriesExamples(); 
   MedicalViewerSeriesManager output = LoadObject.LoadJamesHead(); 
 
   MainForm1 form = new MainForm1(output); 
   form.ShowDialog(); 
} 
 
// MainForm1 will be the owner of the medical viewer control. 
class MainForm1 : Form 
{ 
   private Medical3DControl _medical3DControl; 
 
   public MainForm1(MedicalViewerSeriesManager output) 
   { 
      RasterCodecs _codecs = new RasterCodecs(); 
      RasterImage _image; 
 
      CodecsImageInfo codecsInformation; 
 
      _medical3DControl = new Medical3DControl(); 
      this.SizeChanged += new EventHandler(MainForm1_SizeChanged); 
      this.FormClosing += new FormClosingEventHandler(MainForm1_FormClosing); 
 
 
      _medical3DControl.ObjectsContainer.Objects.Add(new Medical3DObject()); 
 
      int index; 
 
      codecsInformation = _codecs.GetInformation((string)output.Stacks[0].Items[0].Data, true); 
 
 
      int width = codecsInformation.Width; 
      int height = codecsInformation.Height; 
      int depth = 256; 
 
      _medical3DControl.ObjectsContainer.Objects[0].MemoryEfficientInit(depth); 
 
      for (index = 0; index < depth; index++) 
      { 
 
         _image = _codecs.Load((string)output.Stacks[0].Items[index].Data, 0, CodecsLoadByteOrder.BgrOrGrayOrRomm, 1, 1); 
         _medical3DControl.ObjectsContainer.Objects[0].MemoryEfficientSetFrame(_image, index, output.Stacks[0].Items[index].ImagePosition, true); 
      } 
 
      string spearator = ("\\"); 
      string[] test = output.Stacks[0].Items[0].ImageOrientation.Split(spearator.ToCharArray()); 
      float[] orientation = new float[6]; 
      int i; 
      for (i = 0; i < 6; i++) 
      { 
         orientation[i] = (float)Convert.ToDouble(test[i]); 
      } 
 
      _medical3DControl.ObjectsContainer.Objects[0].MemoryEfficientEnd(orientation, output.Stacks[0].PixelSpacing); 
 
      _medical3DControl.ObjectsContainer.VolumeType = Medical3DVolumeType.MPR; 
 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.AxialPlane.FrameIndex = 10; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.CoronalPlane.FrameIndex = 20; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.SagittalPlane.FrameIndex = 30; 
 
      Point3D Normal = new Point3D(1, 1, 0); 
      Point3D Point = new Point3D(0, 0, 0.5f); 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[0].Point = Point; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[0].Normal = Normal; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[0].Enabled = true; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[0].Space = Medical3DSpace.Object;//OBJECTSPACE BASED 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[0].Axis = Medical3DAxis.X;// rotate plane around Y axis 
 
      Normal = new Point3D(1, -1, 0); 
      Point = new Point3D(0, 0.5f, 0.5f); 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[1].Point = Point; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[1].Normal = Normal; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[1].Enabled = true; 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[1].Space = Medical3DSpace.View;//Alignment Space Based 
      _medical3DControl.ObjectsContainer.Objects[0].MPR.Planes[1].Axis = Medical3DAxis.X;// Rotate plane around Z axis 
 
      _medical3DControl.AddAction(MedicalViewerActionType.TranslatePlane); 
      _medical3DControl.SetAction(MedicalViewerActionType.TranslatePlane, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active); 
 
      _medical3DControl.AddAction(MedicalViewerActionType.RotatePlane); 
      _medical3DControl.SetAction(MedicalViewerActionType.RotatePlane, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active); 
 
      Controls.Add(_medical3DControl); 
   } 
 
   void MainForm1_FormClosing(object sender, FormClosingEventArgs e) 
   { 
      _medical3DControl.Dispose(); 
   } 
 
 
   void MainForm1_SizeChanged(object sender, EventArgs e) 
   { 
      if (_medical3DControl != null) 
         _medical3DControl.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom); 
   } 
} 
Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.MedicalViewer 
Imports Leadtools.Medical3D 
 
Public Sub Medical3DControlExample() 
   Dim LoadObject As Medical3DLoadDICOMSeriesExamples = New Medical3DLoadDICOMSeriesExamples() 
   Dim output As MedicalViewerSeriesManager = LoadObject.LoadJamesHead() 
 
   Dim form As MainForm1 = New MainForm1(output) 
   form.ShowDialog() 
End Sub 
 
' MainForm1 will be the owner of the medical viewer control. 
Private Class MainForm1 : Inherits Form 
   Private _medical3DControl As Medical3DControl 
 
   Public Sub New(ByVal output As MedicalViewerSeriesManager) 
      Dim _codecs As RasterCodecs = New RasterCodecs() 
      Dim _image As RasterImage 
 
      Dim codecsInformation As CodecsImageInfo 
 
      _medical3DControl = New Medical3DControl() 
      AddHandler SizeChanged, AddressOf MainForm1_SizeChanged 
      AddHandler FormClosing, AddressOf MainForm1_FormClosing 
 
 
      _medical3DControl.ObjectsContainer.Objects.Add(New Medical3DObject()) 
 
      Dim index As Integer 
 
      codecsInformation = _codecs.GetInformation(CStr(output.Stacks(0).Items(0).Data), True) 
 
 
      Dim width As Integer = codecsInformation.Width 
      Dim height As Integer = codecsInformation.Height 
      Dim depth As Integer = 256 
 
      _medical3DControl.ObjectsContainer.Objects(0).MemoryEfficientInit(depth) 
 
      index = 0 
      Do While index < depth 
 
         _image = _codecs.Load(CStr(output.Stacks(0).Items(index).Data), 0, CodecsLoadByteOrder.BgrOrGrayOrRomm, 1, 1) 
         _medical3DControl.ObjectsContainer.Objects(0).MemoryEfficientSetFrame(_image, index, output.Stacks(0).Items(index).ImagePosition, True) 
         index += 1 
      Loop 
 
      Dim spearator As String = ("\") 
      Dim test As String() = output.Stacks(0).Items(0).ImageOrientation.Split(spearator.ToCharArray()) 
      Dim orientation As Single() = New Single(5) {} 
      Dim i As Integer 
      For i = 0 To 5 
         orientation(i) = CSng(Convert.ToDouble(test(i))) 
      Next i 
 
      _medical3DControl.ObjectsContainer.Objects(0).MemoryEfficientEnd(orientation, output.Stacks(0).PixelSpacing) 
 
      _medical3DControl.ObjectsContainer.VolumeType = Medical3DVolumeType.MPR 
 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.AxialPlane.FrameIndex = 10 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.CoronalPlane.FrameIndex = 20 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.SagittalPlane.FrameIndex = 30 
 
      Dim Normal As Point3D = New Point3D(1, 1, 0) 
      Dim Point As Point3D = New Point3D(0, 0, 0.5F) 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(0).Point = Point 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(0).Normal = Normal 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(0).Enabled = True 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(0).Space = Medical3DSpace.Object 'OBJECTSPACE BASED 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(0).Axis = Medical3DAxis.X ' rotate plane around Y axis 
 
      Normal = New Point3D(1, -1, 0) 
      Point = New Point3D(0, 0.5F, 0.5F) 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(1).Point = Point 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(1).Normal = Normal 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(1).Enabled = True 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(1).Space = Medical3DSpace.View 'Alignment Space Based 
      _medical3DControl.ObjectsContainer.Objects(0).MPR.Planes(1).Axis = Medical3DAxis.X ' Rotate plane around Z axis 
 
      _medical3DControl.AddAction(MedicalViewerActionType.TranslatePlane) 
      _medical3DControl.SetAction(MedicalViewerActionType.TranslatePlane, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active) 
 
      _medical3DControl.AddAction(MedicalViewerActionType.RotatePlane) 
      _medical3DControl.SetAction(MedicalViewerActionType.RotatePlane, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active) 
 
      Controls.Add(_medical3DControl) 
   End Sub 
 
   Private Sub MainForm1_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs) 
      _medical3DControl.Dispose() 
   End Sub 
 
 
   Private Sub MainForm1_SizeChanged(ByVal sender As Object, ByVal e As EventArgs) 
      If Not _medical3DControl Is Nothing Then 
         _medical3DControl.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom) 
      End If 
   End Sub 
End Class 

Requirements

Target Platforms

Help Version 20.0.2020.3.31
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2020 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Medical3D Assembly