SetPortableType Method

Summary

Specifies the media type from portable data.

Syntax
C#
VB
C++
public void SetPortableType( 
   byte[] Type 
) 
Public Sub SetPortableType( _ 
   ByVal Type() As Byte _ 
)  
public: 
void SetPortableType(  
   array<byte>^ Type 
)  

Parameters

Type
A byte array containing the portable media type information to set.

Remarks

Specifies the media type from portable data. Only pass data obtained from GetPortableType method to this method. The portable data contains all the information to describe the media type. For example, you do not need to set MediaType.Type, etc. You can, if you want to, but you don't have to. For more information on using the high level method of acquiring the media type, refer to MediaType object. If the method fails, an error is raised. For more information, refer to the Error Codes.

Example
C#
VB
using Leadtools; 
using Leadtools.Multimedia; 
using LeadtoolsMultimediaExamples.Fixtures; 
 
public bool _result = false; 
public CaptureAndPlayCtrlForm _form = new CaptureAndPlayCtrlForm(); 
public SampleTarget _captureTarget; 
public SampleSource _playSource; 
 
public void GetPortableTypeExample() 
{ 
   // reference the convert control 
   CaptureCtrl capturectrl = _form.CaptureCtrl; 
   PlayCtrl playctrl = _form.PlayCtrl; 
 
   // This example demonstrates how to play a capture stream  
   // using a play control and portable media types. 
 
   try 
   { 
      // set the source device 
      if (capturectrl.VideoDevices["Analog"] == null) 
         throw new Exception("No Analog video devices available!"); 
 
      capturectrl.VideoDevices["Analog"].Selected = true; 
 
      // set the preview 
      capturectrl.Preview = true; 
 
      // create a sample target object for the capture control 
      _captureTarget = new SampleTarget(); 
 
      // set the capture target to our sample target created earlier 
      capturectrl.TargetObject = _captureTarget; 
 
      // create a new sample source object for the play control 
      _playSource = new SampleSource(); 
 
      // set the video compressor  
      capturectrl.VideoCompressors.MCmpMJpeg.Selected = true; 
 
      //// for this example we will only capture 120 seconds of video 
      capturectrl.UseTimeLimit = true; 
      capturectrl.TimeLimit = 120; 
 
      // start the capture 
      capturectrl.StartCapture(CaptureMode.Video); 
 
      // we could just assign the media type from target to source 
      // however, let's use the portable type to simulate 
      // the needed steps for remote playback 
      Byte[] portableMediaType = _captureTarget.GetConnectedMediaType().GetPortableType(); 
 
      // initialize a new media type object with the portable type 
      MediaType mt = new MediaType(); 
      mt.SetPortableType(portableMediaType); 
 
      // set the sample source media type 
      _playSource.SetMediaType(mt); 
 
      // set the play controls sample source object 
      playctrl.SourceObject = _playSource; 
 
      // create a timer to drive the sample delivery 
      _form.TestTimer.Tick += new EventHandler(SampleDeliver_Tick); 
      _form.TestTimer.Interval = 33; 
      _form.TestTimer.Start(); 
 
      // we'll loop on the state and pump messages for this example. 
      // but you should not need to if running from a Windows Forms application. 
      while (capturectrl.State == CaptureState.Running 
         || capturectrl.State == CaptureState.Paused 
         || capturectrl.State == CaptureState.Pending) 
         Application.DoEvents(); 
   } 
   catch (Exception) 
   { 
      _result = false; 
   } 
} 
 
void SampleDeliver_Tick(object sender, EventArgs e) 
{ 
   _form.TestTimer.Stop(); 
 
   bool eos = false; 
   MediaSample cs = null; 
 
   try 
   { 
      cs = _captureTarget.GetSample(1000); 
   } 
   catch (COMException cex) 
   { 
      if (cex.ErrorCode == (int)ErrorCode.VFW_E_SAMPLE_REJECTED_EOS) 
         eos = true; 
      else 
         throw; 
   } 
   catch (Exception ex) 
   { 
      throw new Exception(ex.Message); 
   } 
 
   if (!eos) 
   { 
      _playSource.DeliverSample(1000, cs); 
      _form.TestTimer.Start(); 
   } 
   else 
   { 
      _playSource.DeliverEndOfStream(1000); 
      _form.TestTimer.Stop(); 
 
      // set the result 
      _result = true; 
   } 
} 
Imports Leadtools 
Imports Leadtools.Multimedia 
Imports LeadtoolsMultimediaExamples.Fixtures 
 
Public _result As Boolean = False 
Public _form As CaptureAndPlayCtrlForm = New CaptureAndPlayCtrlForm() 
Public _captureTarget As SampleTarget 
Public _playSource As SampleSource 
 
Public Sub GetPortableTypeExample() 
   ' reference the convert control 
   Dim capturectrl As CaptureCtrl = _form.CaptureCtrl 
   Dim playctrl As PlayCtrl = _form.PlayCtrl 
 
   ' This example demonstrates how to play a capture stream  
   ' using a play control and portable media types. 
 
   Try 
      ' set the source device 
      If capturectrl.VideoDevices("Analog") Is Nothing Then 
         Throw New Exception("No Analog video devices available!") 
      End If 
 
      capturectrl.VideoDevices("Analog").Selected = True 
 
      ' set the preview 
      capturectrl.Preview = True 
 
      ' create a sample target object for the capture control 
      _captureTarget = New SampleTarget() 
 
      ' set the capture target to our sample target created earlier 
      capturectrl.TargetObject = _captureTarget 
 
      ' create a new sample source object for the play control 
      _playSource = New SampleSource() 
 
      ' set the video compressor  
      capturectrl.VideoCompressors.MCmpMJpeg.Selected = True 
 
      '// for this example we will only capture 120 seconds of video 
      capturectrl.UseTimeLimit = True 
      capturectrl.TimeLimit = 120 
 
      ' start the capture 
      capturectrl.StartCapture(CaptureMode.Video) 
 
      ' we could just assign the media type from target to source 
      ' however, let's use the portable type to simulate 
      ' the needed steps for remote playback 
      Dim portableMediaType As Byte() = _captureTarget.GetConnectedMediaType().GetPortableType() 
 
      ' initialize a new media type object with the portable type 
      Dim mt As MediaType = New MediaType() 
      mt.SetPortableType(portableMediaType) 
 
      ' set the sample source media type 
      _playSource.SetMediaType(mt) 
 
      ' set the play controls sample source object 
      playctrl.SourceObject = _playSource 
 
      ' create a timer to drive the sample delivery 
      AddHandler _form.TestTimer.Tick, AddressOf SampleDeliver_Tick 
      _form.TestTimer.Interval = 33 
      _form.TestTimer.Start() 
 
      ' we'll loop on the state and pump messages for this example. 
      ' but you should not need to if running from a Windows Forms application. 
      Do While capturectrl.State = CaptureState.Running _ 
       OrElse capturectrl.State = CaptureState.Paused OrElse capturectrl.State = CaptureState.Pending 
         Application.DoEvents() 
      Loop 
   Catch e1 As Exception 
      _result = False 
   End Try 
End Sub 
 
Private Sub SampleDeliver_Tick(ByVal sender As Object, ByVal e As EventArgs) 
   _form.TestTimer.Stop() 
 
   Dim eos As Boolean = False 
   Dim cs As MediaSample = Nothing 
 
   Try 
      cs = _captureTarget.GetSample(1000) 
   Catch cex As COMException 
      If cex.ErrorCode = CInt(ErrorCode.VFW_E_SAMPLE_REJECTED_EOS) Then 
         eos = True 
      Else 
         Throw 
      End If 
   Catch ex As Exception 
      Throw 
   End Try 
 
   If (Not eos) Then 
      _playSource.DeliverSample(1000, cs) 
      _form.TestTimer.Start() 
   Else 
      _playSource.DeliverEndOfStream(1000) 
      _form.TestTimer.Stop() 
 
      ' set the result 
      _result = True 
   End If 
End Sub 
Requirements

Target Platforms

See Also

Reference

MediaType Class

MediaType Members

Help Version 20.0.2019.11.25
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2019 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Multimedia Assembly