ConvertToColoredGrayCommand Class

Converts an image to a grayscale image, then enhances the color components based on the class properties. This class is available in the Document Toolkits.

• This class is more general than the GrayScaleExtendedCommand class. The ConvertToColoredGrayCommand class can be used to give images a "sepia" look by adding a blue or brown color.

• RedFactor + GreenFactor + BlueFactor must equal 1000. (Internally the values are divided by 1000).

• For each pixel in the image the red, green and blue values are modified by the RedFactor, GreenFactor and BlueFactor properties, respectively. This allows the user to give more weight to one color, essentially enhancing that color, before the pixel is converted to grayscale.

• For example, if this class is used with the RedFactor set to 500, the GreenFactor set to 250 and the BlueFactor set to 250, the red value of each pixel will get 50 percent of the weight when determining the grayscale value. The green value will get 25 percent of the weight and the blue value will get 25 percent of the weight when determining the grayscale value. This highlights or enhances the red in the image, prior to conversion to grayscale. Upon conversion to grayscale, the red, green and blue components of the output pixel are the same. Call this value G. Therefore, the RGB values for the pixel would be (G, G, G).
• Once the grayscale value for the pixel has been obtained, the red component of the output pixel can be further modified using the RedGrayFactor value. The equation for this can be seen below:
• The green and blue components are found similarly, using the GreenGrayFactor and the BlueGrayFactor values, respectively.
• Please note that the RedGrayFactor, GreenGrayFactor and BlueGrayFactor values can be negative. A negative value results in a decrease in pixel intensity. A positive value results in an increase in pixel intensity.
• If RedGrayFactor = GreenGrayFactor = BlueGrayFactor = 0, then the output is the same as the output from the GrayScaleExtendedCommand method.
• This class supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.
• This class does not support signed data images.
• This command does not support 32-bit grayscale images.

For more information, refer to Introduction to Image Processing With LEADTOOLS. For more information, refer to Grayscale Images.

Run the ConvertToColoredGrayCommand on an image with RedFactor = 300, GreenFactor = 590, BlueFactor = 110, RedGrayFactor = 500, GreenGrayFactor = 300, BlueGrayFactor = 200.

Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.ImageProcessing.Color 
 
    
Public Sub ConvertToColoredGrayCommandExample() 
   Dim codecs As New RasterCodecs() 
   codecs.ThrowExceptionsOnInvalidImages = True 
   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg")) 
 
   ' Prepare the command 
   Dim command As ConvertToColoredGrayCommand = New ConvertToColoredGrayCommand 
   'These arguments will transform the image into a grayscale image. 
   command.RedFactor = 300 
   command.GreenFactor = 590 
   command.BlueFactor = 110 
   command.RedGrayFactor = 500 
   command.GreenGrayFactor = 300 
   command.BlueGrayFactor = 200 
   command.Run(leadImage) 
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24) 
 
End Sub 
 
Public NotInheritable Class LEAD_VARS 
Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images" 
End Class 

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.Color; 
 
       
public void ConvertToColoredGrayCommandExample() 
{ 
   // Load an image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.ThrowExceptionsOnInvalidImages = true; 
   RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg")); 
 
   // Prepare the command 
   ConvertToColoredGrayCommand command = new ConvertToColoredGrayCommand(); 
   //These arguments will transform the image into a grayscale image. 
   command.RedFactor       = 300;  
   command.GreenFactor     = 590; 
   command.BlueFactor      = 110; 
   command.RedGrayFactor   = 500; 
   command.GreenGrayFactor = 300; 
   command.BlueGrayFactor  = 200; 
   command.Run(image); 
   codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24); 
 
} 
 
static class LEAD_VARS 
{ 
public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images"; 
} 

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.Color; 
 
       
public async Task ConvertToColoredGrayCommandExample() 
{ 
   // Load an image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.ThrowExceptionsOnInvalidImages = true; 
   // Load the image 
   string srcFileName = @"Assets\Image1.cmp"; 
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName); 
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile)); 
 
   // Prepare the command 
   ConvertToColoredGrayCommand command = new ConvertToColoredGrayCommand(); 
   //These arguments will transform the image into a grayscale image. 
   command.RedFactor       = 300;  
   command.GreenFactor     = 590; 
   command.BlueFactor      = 110; 
   command.RedGrayFactor   = 500; 
   command.GreenGrayFactor = 300; 
   command.BlueGrayFactor  = 200; 
   command.Run(image); 
 
   string destFileName = @"result.jpg"; 
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName); 
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Jpeg, 0); 
} 

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.Color; 
using Leadtools.Examples; 
 
public void ConvertToColoredGrayCommandExample(RasterImage image, Stream outStream) 
{ 
   // Prepare the command 
   ConvertToColoredGrayCommand command = new ConvertToColoredGrayCommand(); 
   //These arguments will transform the image into a grayscale image. 
   command.RedFactor       = 300;  
   command.GreenFactor     = 590; 
   command.BlueFactor      = 110; 
   command.RedGrayFactor   = 500; 
   command.GreenGrayFactor = 300; 
   command.BlueGrayFactor  = 200; 
   command.Run(image); 
   // Save result image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24); 
   image.Dispose(); 
} 

Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.ImageProcessing.Color 
 
Public Sub ConvertToColoredGrayCommandExample(ByVal image As RasterImage, ByVal outStream As Stream) 
   ' Prepare the command 
   Dim command As ConvertToColoredGrayCommand = New ConvertToColoredGrayCommand() 
   'These arguments will transform the image into a grayscale image. 
   command.RedFactor = 300 
   command.GreenFactor = 590 
   command.BlueFactor = 110 
   command.RedGrayFactor = 500 
   command.GreenGrayFactor = 300 
   command.BlueGrayFactor = 200 
   command.Run(image) 
   ' Save result image 
   Dim codecs As RasterCodecs = New RasterCodecs() 
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24) 
   image.Dispose() 
End Sub 

Target Platforms

Reference

ConvertToColoredGrayCommand Members

Leadtools.ImageProcessing.Color Namespace

Introduction to Image Processing With LEADTOOLS

Grayscale Images

BalanceColorsCommand Class

Leadtools.ImageProcessing.GrayscaleCommand

GrayScaleExtendedCommand Class

Leadtools.RasterImage.IsGray