Leadtools.Annotations.Automation Library Changes

Summary

Version Changes: 18 to 19

New Members

The following members have been added:

Name Description
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor Initializes a new instance of the AnnAfterObjectChangedEventArgs class.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.cancel Gets or sets a value indicating whether the change should be canceled.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.changeType Gets the type of change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.designer Gets the designer responsible for the change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.objects Gets the objects that have been changed.
Leadtools.Annotations.Automation.AnnAutomation.#ctor Initializes a new instance of the AnnAutomation class.
Leadtools.Annotations.Automation.AnnAutomation.active Gets or sets a value indicating whether this AnnAutomation is active.
Leadtools.Annotations.Automation.AnnAutomation.activeContainer Gets or sets the active container of the automation.
Leadtools.Annotations.Automation.AnnAutomation.activeContainerChanged.remove Occurs when the active container of this object is changed.
Leadtools.Annotations.Automation.AnnAutomation.addLayer Adds a layer to the container.
Leadtools.Annotations.Automation.AnnAutomation.afterObjectChanged.remove Occurs when an AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.afterUndoRedo.remove Occurs after an undo or redo operation.
Leadtools.Annotations.Automation.AnnAutomation.alignBottoms Aligns the selected objects along with alignment target bottom side.
Leadtools.Annotations.Automation.AnnAutomation.alignCenters Aligns the selected objects along with alignment target horizontal center.
Leadtools.Annotations.Automation.AnnAutomation.alignLefts Aligns the selected objects along with alignment target left side.
Leadtools.Annotations.Automation.AnnAutomation.alignMiddles Aligns the selected objects along with alignment target vertical center.
Leadtools.Annotations.Automation.AnnAutomation.alignRights Aligns the selected objects along with alignment target rights side.
Leadtools.Annotations.Automation.AnnAutomation.alignTops Aligns the selected objects along with alignment target top side.
Leadtools.Annotations.Automation.AnnAutomation.applyAllDecryptors Applies all the decryptor AnnEncryptObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.applyAllEncryptors Applies all the encryptor AnnEncryptObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.applyDecryptor Applies the decryptor AnnEncryptObject that is currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.applyEncryptor Applies the encryptor AnnEncryptObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.attach Attaches this AnnAutomation object to a IAnnAutomationControl object.
Leadtools.Annotations.Automation.AnnAutomation.attachContainer Attaches this AnnAutomation object to a container and optional undo/redo object.
Leadtools.Annotations.Automation.AnnAutomation.automationControl Gets the automation control for this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.beforeObjectChanged.remove Occurs when an AnnObject is about to be changed.
Leadtools.Annotations.Automation.AnnAutomation.beginUndo Creates a new undo node in this AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.beginUpdateContainers Stops the automation from passing events to the automation control while containers are being added or removed.
Leadtools.Annotations.Automation.AnnAutomation.bringLayerToFront Brings the currently selected layer up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.bringToFront Brings the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.canAlign Gets a value that indicates whether this AnnAutomation can align or change the size for selected objects based on alignment target.
Leadtools.Annotations.Automation.AnnAutomation.canApplyAllDecryptors Gets a value that indicates whether any decryptor AnnEncryptObject object in this AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.canApplyAllEncryptors Gets a value that indicates whether any encryptor AnnEncryptObject object in this AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.canApplyDecryptor Gets a value that indicates whether the object currently being edited is a decryptor AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.canApplyEncryptor Gets a value that indicates whether the object currently being edited (selected) is an encryptor AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.canBringLayerToFirst Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order.
Leadtools.Annotations.Automation.AnnAutomation.canBringLayerToFront Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up the z-order.
Leadtools.Annotations.Automation.AnnAutomation.canBringToFirst Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) to the top of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.canBringToFront Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.cancel Cancels the operation currently being performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.cancelUndo Cancels the undo node started in this AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.canCopy Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be copied to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.canDeleteObjects Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be deleted.
Leadtools.Annotations.Automation.AnnAutomation.canFlip Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be flipped.
Leadtools.Annotations.Automation.AnnAutomation.canGroup Gets a value indicating whether this AnnAutomation is in a state where objects can be grouped together.
Leadtools.Annotations.Automation.AnnAutomation.canLock Gets a value that indicates whether the object currently being edited (selected) can be locked.
Leadtools.Annotations.Automation.AnnAutomation.canPaste Gets a value that indicates whether the clipboard contains annotation objects that can be pasted.
Leadtools.Annotations.Automation.AnnAutomation.canRealizeAllRedactions Gets a value that indicates whether any of the AnnRedactionObject objects in this AnnAutomation can be realized.
Leadtools.Annotations.Automation.AnnAutomation.canRealizeRedaction Gets a value that indicates whether the object currently being edited (selected) is an AnnRedactionObject object and can be realized.
Leadtools.Annotations.Automation.AnnAutomation.canRedo Gets a value indicating whether the user can redo the previous operation performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.canResetRotatePoints Gets a value that indicates whether this AnnAutomation is currently in a state where the selected AnnObject is able to have its rotate controlpoints reset to the default location.
Leadtools.Annotations.Automation.AnnAutomation.canRestoreAllRedactions Gets a value that indicates whether any AnnRedactionObject objects in this AnnAutomation can be restored.
Leadtools.Annotations.Automation.AnnAutomation.canRestoreRedaction Gets a value that indicates whether the object currently being edited (selected) is a AnnRedactionObject and can be restored.
Leadtools.Annotations.Automation.AnnAutomation.canSelectNone Gets a value indicating whether this AnnAutomation is in a state where it can deselect objects.
Leadtools.Annotations.Automation.AnnAutomation.canSelectObjects Gets a value that indicates whether the this AnnAutomation is in a state where any object can be selected.
Leadtools.Annotations.Automation.AnnAutomation.canSendLayerToBack Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent down the z-order.
Leadtools.Annotations.Automation.AnnAutomation.canSendLayerToLast Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent to end of the z-order.
Leadtools.Annotations.Automation.AnnAutomation.canSendToBack Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.canSendToLast Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) to the bottom of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.canShowObjectContextMenu Gets a value that indicates whether this AnnAutomation is currently in a state where the object context menu can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.canShowObjectProperties Gets a value that indicates whether this AnnAutomation is currently in a state where the object properties can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.canShowProperties Gets a value that indicates whether this AnnAutomation is currently in a state where the user properties dialog can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.canUndo Gets a value that indicates whether the user can undo the previous operation performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.canUngroup Gets a value indicating whether this AnnAutomation is in a state where objects can be ungrouped.
Leadtools.Annotations.Automation.AnnAutomation.canUnlock Gets a value that indicates whether the object currently being edited (selected) can be unlocked.
Leadtools.Annotations.Automation.AnnAutomation.container Gets the AnnContainer of this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.containers The list of containers in this AnnAutomation when multi-containers mode is used.
Leadtools.Annotations.Automation.AnnAutomation.copy Copies the objects currently being edited to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.currentDesigner Gets the current working designer.
Leadtools.Annotations.Automation.AnnAutomation.currentDesignerChanged.remove Occurs when the current designer has been changed.
Leadtools.Annotations.Automation.AnnAutomation.currentEditObject Gets the current AnnObject being edited.
Leadtools.Annotations.Automation.AnnAutomation.defaultCurrentObjectId Gets or sets the annotations object id to use when a draw designer finishes its operation.
Leadtools.Annotations.Automation.AnnAutomation.deleteLayer Deletes a layer from the container
Leadtools.Annotations.Automation.AnnAutomation.deleteSelectedObjects Deletes the selected objects from this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.deserializeObjectError.remove Occurs when an error occur during an object serialization operation.
Leadtools.Annotations.Automation.AnnAutomation.detach Detaches this AnnAutomation object from its IAnnAutomationControl object.
Leadtools.Annotations.Automation.AnnAutomation.dragDrop.remove Occurs when an AnnObject is being dragged out of a container.
Leadtools.Annotations.Automation.AnnAutomation.draw.remove Occurs when an AnnObject is being drawn.
Leadtools.Annotations.Automation.AnnAutomation.edit.remove Occurs when an AnnObject is being edited.
Leadtools.Annotations.Automation.AnnAutomation.editContent.remove Occurs when the content of an AnnObject is edited.
Leadtools.Annotations.Automation.AnnAutomation.editText.remove Occurs when the text of an AnnObject is edited.
Leadtools.Annotations.Automation.AnnAutomation.enableDragDrop Gets or sets a value that indicates whether drag and drop is enabled in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.endDesigner Ends (and commits) the operation currently being performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.endUndo Commits the undo node started in this AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.endUpdateContainers Instruct the viewer that updates are completed and rendering of the content can be resumed.
Leadtools.Annotations.Automation.AnnAutomation.flip Flips the objects that are currently being edited (selected) in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.getContainerInvalidRect Gets the current invalidation rectangle (the physical location and size) for a container
Leadtools.Annotations.Automation.AnnAutomation.getDefaultCurrentObjectId Returns the value of the default current object id.
Leadtools.Annotations.Automation.AnnAutomation.getObjectInvalidateRect Gets a LeadRectD object that specifies the current physical rectangle of this AnnObject.
Leadtools.Annotations.Automation.AnnAutomation.getUndoRedoObject Gets an object that contains the current undo/redo object data.
Leadtools.Annotations.Automation.AnnAutomation.hitTestContainer Gets the container under the specified location.
Leadtools.Annotations.Automation.AnnAutomation.invalidate Invalidates the specified region of the automation control.
Leadtools.Annotations.Automation.AnnAutomation.invalidateContainer Invalidates the specified container and re-renders its content in the automation control.
Leadtools.Annotations.Automation.AnnAutomation.invalidateObject Invalidates and re-draws an object.
Leadtools.Annotations.Automation.AnnAutomation.invokeAfterObjectChanged Invokes the AfterObjectChanged event with the specified parameters.
Leadtools.Annotations.Automation.AnnAutomation.invokeObjectModified Invokes the ObjectModified event with the specified parameters.
Leadtools.Annotations.Automation.AnnAutomation.layerFromSelectedObjects Creates a new layer from the currently selected objects.
Leadtools.Annotations.Automation.AnnAutomation.lock Locks the object(s) currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.lockObject.remove Occurs when an AnnObject is locked.
Leadtools.Annotations.Automation.AnnAutomation.makeSameHeight Make the height for selected objects the same with alignment target height.
Leadtools.Annotations.Automation.AnnAutomation.makeSameSize Make the size for selected objects the same with alignment target size.
Leadtools.Annotations.Automation.AnnAutomation.makeSameWidth Make the width for selected objects the same with alignment target width.
Leadtools.Annotations.Automation.AnnAutomation.manager Returns the AnnAutomationManager that this AnnAutomation object belongs to.
Leadtools.Annotations.Automation.AnnAutomation.objectModified.remove Occurs when one or more AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.onAfterUndoRedo Raises the AfterUndoRedo event.
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerDown Called by the IAnnAutomationControl pointer down event.
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerMove Called by the IAnnAutomationControl pointer move event.
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerUp Called by the IAnnAutomationControl pointer up event.
Leadtools.Annotations.Automation.AnnAutomation.onCurrentDesignerChanged Raises the CurrentDesignerChanged event.
Leadtools.Annotations.Automation.AnnAutomation.onDragDrop Raises the DragDrop event.
Leadtools.Annotations.Automation.AnnAutomation.onShowContextMenu.remove Occurs when the automation needs to show the context menu when no objects are selected.
Leadtools.Annotations.Automation.AnnAutomation.onShowObjectProperties.remove Occurs when the automation needs to show the properties dialog of the selected object.
Leadtools.Annotations.Automation.AnnAutomation.onUndoRedoChanged Raises the UndoRedoChanged event.
Leadtools.Annotations.Automation.AnnAutomation.paste Copies the annotation objects from the clipboard to this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.pasteAt Copies the annotation objects from the clipboard to this AnnAutomation at the specified location.
Leadtools.Annotations.Automation.AnnAutomation.pasteStringAt Copies the annotation objects contained in a serialization object at the specified position.
Leadtools.Annotations.Automation.AnnAutomation.realizeAllRedactions Realizes all the AnnRedactionObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.realizeRedaction Realizes the AnnRedactionObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.redo Reapplies the last operation that was undone in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.resetRotatePoints Resets the rotate control points of the selected AnnObject to their default locations.
Leadtools.Annotations.Automation.AnnAutomation.restoreAllRedactions Restores all of the AnnRedactionObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.restoreCursor.remove Occurs when the automation has determine that the original cursor needs to be restored.
Leadtools.Annotations.Automation.AnnAutomation.restoreRedaction Restores the AnnRedactionObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.run.remove Occurs when an AnnObject is being run.
Leadtools.Annotations.Automation.AnnAutomation.selectedObjectsChanged.remove Occurs when the selected object changes.
Leadtools.Annotations.Automation.AnnAutomation.selectLayer Selects a layer in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.selectObject Select an object in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.selectObjects Selects an object or a group of objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.sendLayerToBack Sends the currently selected layer down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.sendToBack Sends the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.setCursor.remove Occurs when the automation has determine that the user needs to change the cursor.
Leadtools.Annotations.Automation.AnnAutomation.showContextMenu Displays the automation context menu.
Leadtools.Annotations.Automation.AnnAutomation.showObjectContextMenu Displays the object context menu.
Leadtools.Annotations.Automation.AnnAutomation.showObjectProperties Shows the object properties
Leadtools.Annotations.Automation.AnnAutomation.toolTip.remove Occurs when the mouse hovers over an annotation object and a tooltip is requested.
Leadtools.Annotations.Automation.AnnAutomation.undo Reverses the last operation performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.undoCapacity Gets or sets a value that specifies the capacity of the undo/redo buffer.
Leadtools.Annotations.Automation.AnnAutomation.undoRedoChanged.remove Occurs when the undo or redo buffer changes.
Leadtools.Annotations.Automation.AnnAutomation.unlock Unlocks the object(s) currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.unlockObject.remove Occurs when an AnnObject is unlocked.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor Initializes a new instance of AnnAutomationEventArgs.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.cancel Get or sets a value that indicates whether this event is to be cancelled.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.create Creates a new instance of AnnAutomationEventArgs with the specified parameter.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.object Gets the current selected automation object.
Leadtools.Annotations.Automation.AnnAutomationManager.automations Gets the collection of AnnAutomation objects in this AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.cancelInactiveDesigners Gets or sets a value indicating whether any designers in an AnnAutomation are automatically canceled when the automation becomes inactive.
Leadtools.Annotations.Automation.AnnAutomationManager.create Creates a new instance of AnnAutomationManager with the specified rendering engine.
Leadtools.Annotations.Automation.AnnAutomationManager.createDefaultObjects Creates the default automation annotation objects.
Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectId Gets or sets the current automation object ID.
Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectIdChanged.remove Occurs when the value of the CurrentObjectId property changes.
Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampType Gets or sets the current automation rubber stamp object type.
Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampTypeChanged.remove Occurs when the value of the CurrentRubberStampType property changes.
Leadtools.Annotations.Automation.AnnAutomationManager.deselectOnDown Gets or sets a value that indicates whether to de-select any objects as soon as the user clicks down with the cursor or taps using touch onthe container outside their boundaries.
Leadtools.Annotations.Automation.AnnAutomationManager.editContentAfterDraw Gets or sets a value that indicates whether the EditContent event should occur automatically after the designer has successfullyfinished drawing a new object.
Leadtools.Annotations.Automation.AnnAutomationManager.editObjectAfterDraw Gets or sets a value that indicates whether newly drawn objects are selected (edited).
Leadtools.Annotations.Automation.AnnAutomationManager.editTextAfterDraw Gets or sets a value that indicates whether the EditText event should occur automatically after the designer has successfullyfinished drawing a new text object.
Leadtools.Annotations.Automation.AnnAutomationManager.enableDeselectObject Gets or sets a value that indicates whether clicking on an already selected object while the MultiSelectModifierKey is pressedshould de-select it.
Leadtools.Annotations.Automation.AnnAutomationManager.enableObjectsAlignment Gets or sets a value that indicates whether you can align selected objects based on one of them.
Leadtools.Annotations.Automation.AnnAutomationManager.enablePartialDrop Gets or sets a value that indicates whether to allow partial drop of annotation objects between multiple containers.
Leadtools.Annotations.Automation.AnnAutomationManager.enableThumbsSelection Gets or sets a value that indicates whether clicking on any of the thumbs of the objects automatically starts editing.
Leadtools.Annotations.Automation.AnnAutomationManager.enableToolTip Gets or sets a value that indicates whether firing the ToolTip event is enabled
Leadtools.Annotations.Automation.AnnAutomationManager.endDrawWhenLostFocus Gets or sets a value indicating whether any designers in an AnnAutomation are automatically canceled when the automation loses focus.
Leadtools.Annotations.Automation.AnnAutomationManager.endEditDesignerBeforeDraw Gets or sets a value that indicates whether to end the current edit designer when the user starts drawing a new object.
Leadtools.Annotations.Automation.AnnAutomationManager.extendedModeModifierKey Gets or sets the extended mode modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.findObject Finds the AnnAutomationObject for a specified AnnObject
Leadtools.Annotations.Automation.AnnAutomationManager.findObjectById Finds the specified AnnAutomationObject by id.
Leadtools.Annotations.Automation.AnnAutomationManager.FontRelativeToImageDpi Indicates whether to take image DPI in consideration when calculating font size.
Leadtools.Annotations.Automation.AnnAutomationManager.forceSelectionModifierKey Gets or sets a value that indicates whether the user can draw the selection object only when its key modifiers are pressed.
Leadtools.Annotations.Automation.AnnAutomationManager.groupsRoles Gets or sets the AnnGroupsRoles associated with this automation manager.
Leadtools.Annotations.Automation.AnnAutomationManager.hitTestBehavior Gets or sets a value that determine how objects are hit-tested through a selection rectangle.
Leadtools.Annotations.Automation.AnnAutomationManager.loadPackage Loads the automation objects from the specified package.
Leadtools.Annotations.Automation.AnnAutomationManager.maintainAspectRatio Gets or sets a value that indicates whether to preserve the aspect ratio when moving a corner thumb for all AnnEditDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.multiSelectModifierKey Gets or sets the multi-select modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.objects Gets the collection of AnnAutomationObject objects in this AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.platformCallbacks Gets the platform-specific callbacks for this automation manager.
Leadtools.Annotations.Automation.AnnAutomationManager.redactionRealizePassword Gets or sets the password to use for realization of AnnRedactionObject objects.
Leadtools.Annotations.Automation.AnnAutomationManager.renderingEngine Gets or sets the rendering engine associated with this AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.resources Gets or sets the annotations resources used by all the containers used with this automation manager.
Leadtools.Annotations.Automation.AnnAutomationManager.restrictDesigners Gets or sets a value that indicates whether the object should be restricted inside the container boundary.
Leadtools.Annotations.Automation.AnnAutomationManager.rotateModifierKey Gets or sets the rotate modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.runHitTestBuffer Gets or sets the hit test buffer for all AnnRunDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.selectionModifierKey Gets or sets the value of the modifier key that must be pressed in order for the user to start drawing the selection object.
Leadtools.Annotations.Automation.AnnAutomationManager.showThumbs Gets or sets a value that indicates whether to show the thumbs.
Leadtools.Annotations.Automation.AnnAutomationManager.snapToGridOptions Gets or sets the default AnnSnapToGridOptions of this AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.thumbsGap Gets or sets a value that indicates which thumbs to display in a polyline object.
Leadtools.Annotations.Automation.AnnAutomationManager.thumbsHitTestBuffer Gets or sets the hit test buffer for all AnnEditDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.usePDFMode Gets or sets if we are annotating a pdf document or no.
Leadtools.Annotations.Automation.AnnAutomationManager.userMode Gets or sets the current user mode.
Leadtools.Annotations.Automation.AnnAutomationManager.userModeChanged.remove Occurs when the value of the UserMode property changes
Leadtools.Annotations.Automation.AnnAutomationManager.useRotateThumbs Gets or sets a value that indicates whether to show the rotation thumbs when an object is selected.
Leadtools.Annotations.Automation.AnnAutomationObject.contextMenu Gets or sets the context menu associated with this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.drawCursor Gets or sets the mouse cursor used when drawing new objects of this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.drawDesignerType Gets or sets the type of the draw designer of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.editDesignerType Gets or sets the type of the edit designer of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.groupName Gets or sets the group name for this automation object
Leadtools.Annotations.Automation.AnnAutomationObject.id Gets or sets the id of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.labelTemplate Gets or sets the template used when creating labels for this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.name Gets or sets the name of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.nextNumber Gets or sets the next number used when creating labels for this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.objectTemplate Gets or sets the initial annotation object template of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.renderer Gets the annotation object renderer for this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.runDesignerType Gets or sets the type of the run designer of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.toolBarImage Gets or sets the toolbar image associated with this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.toolBarToolTipText Gets or sets the tooltip text associated with this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.userData Gets or sets the user-defined data for this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.useRotateThumbs Enables or disables the use of rotate thumbs of this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObjects.#ctor Creates an empty AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.add Adds the specified AnnAutomationObject to the end of the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.AddRange Adds the items of the specified array to the end of this collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.clear Removes all elements from this AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.clearItems Removes all items from the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.collectionChanged.remove Occurs when the collection changes.
Leadtools.Annotations.Automation.AnnAutomationObjects.contains Determines whether an AnnAutomationObject is in the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.count Gets the number of elements contained in the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.getEnumerator Returns an enumerator that iterates through the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.IndexOf Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.Insert Inserts an item into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.insertItem Inserts the specified AnnAutomationObject into this AnnAutomationObjects collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.InsertItemRange Inserts the items of the specified array to into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.InsertRange Inserts the items of the specified array to into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.item Gets or sets the element at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.move Moves the item at the specified index to a new location in the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.moveItem Moves the item at the specified index to a new location in the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.onCollectionChanged Raises the CollectionChanged event with the provided arguments.
Leadtools.Annotations.Automation.AnnAutomationObjects.Remove Removes the first occurrence of a specific object from the collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.removeAt Removes the element at the specified index of the AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.removeItem Removes the element at the specified index of the AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomationObjects.setItem Replaces the element at the specified index.
Leadtools.Annotations.Automation.AnnAutomationObjects.toArray Copies the elements of the AnnAutomationObjects collection to a new array.
Leadtools.Annotations.Automation.AnnAutomations.#ctor Creates an empty AnnAutomations collection.
Leadtools.Annotations.Automation.AnnAutomations.add Adds the specified AnnAutomationObject to the end of the collection.
Leadtools.Annotations.Automation.AnnAutomations.AddRange Adds the items of the specified array to the end of this collection.
Leadtools.Annotations.Automation.AnnAutomations.clear Removes all elements from this AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomations.clearItems Removes all items from the collection.
Leadtools.Annotations.Automation.AnnAutomations.collectionChanged.remove Occurs when the collection changes.
Leadtools.Annotations.Automation.AnnAutomations.contains Determines whether the specified AnnAutomation is in the collection.
Leadtools.Annotations.Automation.AnnAutomations.count Gets the number of elements contained in the collection.
Leadtools.Annotations.Automation.AnnAutomations.getEnumerator Returns an enumerator that iterates through the collection.
Leadtools.Annotations.Automation.AnnAutomations.IndexOf Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection.
Leadtools.Annotations.Automation.AnnAutomations.Insert Inserts an item into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.insertItem Inserts the specified AnnAutomation into this AnnAutomations collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.InsertItemRange Inserts the items of the specified array to into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.InsertRange Inserts the items of the specified array to into this collection at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.item Gets or sets the element at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.move Moves the item at the specified index to a new location in the collection.
Leadtools.Annotations.Automation.AnnAutomations.moveItem Moves the item at the specified index to a new location in the collection.
Leadtools.Annotations.Automation.AnnAutomations.onCollectionChanged Raises the CollectionChanged event with the provided arguments.
Leadtools.Annotations.Automation.AnnAutomations.Remove Removes the first occurrence of a specific object from the collection.
Leadtools.Annotations.Automation.AnnAutomations.removeAt Removes the element at the specified index of the AnnAutomations collection.
Leadtools.Annotations.Automation.AnnAutomations.removeItem Removes the element at the specified index of the AnnAutomationObjects collection.
Leadtools.Annotations.Automation.AnnAutomations.setItem Replaces the element at the specified index.
Leadtools.Annotations.Automation.AnnAutomations.toArray Copies the elements of the AnnAutomations collection to a new array.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.#ctor Initializes a new instance of the AnnBeforeObjectChangedEventArgs class.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.cancel Gets or sets a value indicating whether the change should be canceled.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.changeType Gets the type of change.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.designer Gets the designer responsible for the change.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.objects Gets the objects that have been changed.
Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor Initializes a new instance of AnnCursorEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnCursorEventArgs.designerType Gets the designer type.
Leadtools.Annotations.Automation.AnnCursorEventArgs.dragDropEvent Gets the drag/drop event data that triggered this event.
Leadtools.Annotations.Automation.AnnCursorEventArgs.id Gets the id of the current AnnAutomationObject.
Leadtools.Annotations.Automation.AnnCursorEventArgs.isRotateCenter Gets a value that indicates whether the cursor is on the rotate center.
Leadtools.Annotations.Automation.AnnCursorEventArgs.isRotateGripper Gets a value that indicates whether the cursor is on the rotate gripper.
Leadtools.Annotations.Automation.AnnCursorEventArgs.pointerEvent Gets the original pointer event data that triggered this event.
Leadtools.Annotations.Automation.AnnCursorEventArgs.thumbIndex Gets the 0-based thumb index.
Leadtools.Annotations.Automation.AnnDragDropEventArgs - Provides data for the DragDrop event.
Leadtools.Annotations.Automation.AnnDragDropOperation - Specifies the current operation for a drag and drop event.
Leadtools.Annotations.Automation.AnnObjectChangedType.Metadata (36) An object metadata is modified.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.#ctor Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.changeType Gets the type of change.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.objects Gets the objects that have been modified.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.checkModifier Gets or sets the keyboard modifier callback
Leadtools.Annotations.Automation.AnnPlatformCallbacks.getClipboardData Gets or sets the callback for getting clipboard.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.isClipboardDataPresent Gets or sets the callback for checking if clipboard data is present.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.setClipboardData Gets or sets the callback for setting clipboard data.
Leadtools.Annotations.Automation.IAnnPackage.author Gets the author name of this package.
Leadtools.Annotations.Automation.IAnnPackage.description Gets a description of this package.
Leadtools.Annotations.Automation.IAnnPackage.friendlyName Gets the friendly name of this package.
Leadtools.Annotations.Automation.IAnnPackage.getAutomationObjects Gets an array of the automation objects contained in this package.

Removed Members

The following members have been removed:

Name Description
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType,AnnDesigner) Initializes a new instance of the Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs class.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Cancel Gets or sets a value indicating whether the change should be canceled.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.ChangeType Gets the type of change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Designer Gets the designer responsible for the change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Objects Gets the objects that have been changed.
Leadtools.Annotations.Automation.AnnAutomation.#ctor(AnnAutomationManager,IAnnAutomationControl) Initializes a new instance of the Leadtools.Annotations.Automation.AnnAutomation class.
Leadtools.Annotations.Automation.AnnAutomation.Active Gets or sets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is active.
Leadtools.Annotations.Automation.AnnAutomation.AddLayer(AnnLayer,AnnLayer) Adds a layer to the container.
Leadtools.Annotations.Automation.AnnAutomation.AfterObjectChanged Occurs when an Leadtools.Annotations.Core.AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.ApplyAllDecryptors Applies all the decryptor Leadtools.Annotations.Core.AnnEncryptObject objects in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.ApplyAllEncryptors Applies all the encryptor Leadtools.Annotations.Core.AnnEncryptObject objects in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.ApplyDecryptor Applies the decryptor Leadtools.Annotations.Core.AnnEncryptObject that is currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.ApplyEncryptor Applies the encryptor Leadtools.Annotations.Core.AnnEncryptObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.Attach(IAnnAutomationControl) Attaches this Leadtools.Annotations.Automation.AnnAutomation object to a Leadtools.Annotations.Core~Leadtools.Annotations.Core.IAnnAutomationControl object.
Leadtools.Annotations.Automation.AnnAutomation.AttachContainer(AnnContainer,AnnAutomationUndoRedoObject) Attaches this Leadtools.Annotations.Automation.AnnAutomation object to a container and optional undo/redo object.
Leadtools.Annotations.Automation.AnnAutomation.AutomationControl Gets the automation control for this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.BeforeObjectChanged Occurs when an Leadtools.Annotations.Core.AnnObject is about to be changed.
Leadtools.Annotations.Automation.AnnAutomation.BeginUndo Creates a new undo node in this Leadtools.Annotations.Automation.AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.BringLayerToFront(bool) Brings the currently selected layer up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.BringToFront(bool) Brings the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllDecryptors Gets a value that indicates whether any decryptor Leadtools.Annotations.Core.AnnEncryptObject object in this Leadtools.Annotations.Automation.AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllEncryptors Gets a value that indicates whether any encryptor Leadtools.Annotations.Core.AnnEncryptObject object in this Leadtools.Annotations.Automation.AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyDecryptor Gets a value that indicates whether the object currently being edited is a decryptor Leadtools.Annotations.Core.AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyEncryptor Gets a value that indicates whether the object currently being edited (selected) is an encryptor Leadtools.Annotations.Core.AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFirst Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFront Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be brought up the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringToFirst Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can bring the currently selected object(s) to the top of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringToFront Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can bring the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.Cancel Cancels the operation currently being performed in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.CancelUndo Cancels the undo node started in this Leadtools.Annotations.Automation.AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.CanCopy Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be copied to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.CanDeleteObjects Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be deleted.
Leadtools.Annotations.Automation.AnnAutomation.CanFlip Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be flipped.
Leadtools.Annotations.Automation.AnnAutomation.CanGroup Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where objects can be grouped together.
Leadtools.Annotations.Automation.AnnAutomation.CanLock Gets a value that indicates whether the object currently being edited (selected) can be locked.
Leadtools.Annotations.Automation.AnnAutomation.CanPaste Gets a value that indicates whether the clipboard contains annotation objects that can be pasted.
Leadtools.Annotations.Automation.AnnAutomation.CanRealizeAllRedactions Gets a value that indicates whether any of the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation can be realized.
Leadtools.Annotations.Automation.AnnAutomation.CanRealizeRedaction Gets a value that indicates whether the object currently being edited (selected) is an Leadtools.Annotations.Core.AnnRedactionObject and can be realized.
Leadtools.Annotations.Automation.AnnAutomation.CanRedo Gets a value indicating whether the user can redo the previous operation performed in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.CanResetRotatePoints Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the selected Leadtools.Annotations.Core.AnnObject is able to have its rotate control points reset to the default location.
Leadtools.Annotations.Automation.AnnAutomation.CanRestoreAllRedactions Gets a value that indicates whether any Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation can be restored.
Leadtools.Annotations.Automation.AnnAutomation.CanRestoreRedaction Gets a value that indicates whether the object currently being edited (selected) is a Leadtools.Annotations.Core.AnnRedactionObject and can be restored.
Leadtools.Annotations.Automation.AnnAutomation.CanSelectNone Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where it can deselect objects.
Leadtools.Annotations.Automation.AnnAutomation.CanSelectObjects Gets a value that indicate whether the this Leadtools.Annotations.Automation.AnnAutomation is in a state where any object can be selected.
Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToBack Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be sent down the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToLast Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be sent to end of the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendToBack Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can send the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendToLast Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can send the currently selected object(s) to the bottom of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectContextMenu Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the object context menu can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectProperties Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the object properties can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.CanShowProperties Gets a value that indicate whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the user properties dialog can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.CanUndo Gets a value that indicates whether the user can undo the previous operation performed in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.CanUngroup Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where objects can be ungrouped.
Leadtools.Annotations.Automation.AnnAutomation.CanUnlock Gets a value that indicates whether the object currently being edited (selected) can be unlocked.
Leadtools.Annotations.Automation.AnnAutomation.Container Gets the Leadtools.Annotations.Core.AnnContainer of this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.Copy Copies the objects currently being edited to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.CurrentDesigner Gets the current working designer.
Leadtools.Annotations.Automation.AnnAutomation.CurrentDesignerChanged Occurs when the current designer has been changed.
Leadtools.Annotations.Automation.AnnAutomation.CurrentEditObject Gets the current Leadtools.Annotations.Core.AnnObject being edited.
Leadtools.Annotations.Automation.AnnAutomation.DeleteLayer(AnnLayer,bool) Delets a layer from the container
Leadtools.Annotations.Automation.AnnAutomation.DeleteSelectedObjects Deletes the selected objects from this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.DeserializeObjectError Occurs when an error occur during an object serialization operation.
Leadtools.Annotations.Automation.AnnAutomation.Detach Detaches this Leadtools.Annotations.Automation.AnnAutomation object from its Leadtools.Annotations.Core.IAnnAutomationControl object.
Leadtools.Annotations.Automation.AnnAutomation.Draw Occurs when an Leadtools.Annotations.Core.AnnObject is being drawn.
Leadtools.Annotations.Automation.AnnAutomation.Edit Occurs when an Leadtools.Annotations.Core.AnnObject is being edited.
Leadtools.Annotations.Automation.AnnAutomation.EditText Occurs when the text of an Leadtools.Annotations.Core.AnnObject is edited.
Leadtools.Annotations.Automation.AnnAutomation.EndDesigner Ends (and commits) the operation currently being performed in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.EndUndo Commits the undo node started in this Leadtools.Annotations.Automation.AnnAutomation object.
Leadtools.Annotations.Automation.AnnAutomation.Flip(bool) Flips the objects that are currently being edited (selected) in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.GetObjectInvalidateRect(AnnObject) Gets a Leadtools.LeadRectD object that specifies the current physical rectangle of this Leadtools.Annotations.Core.AnnObject.
Leadtools.Annotations.Automation.AnnAutomation.GetUndoRedoObject Gets an object that contains the current undo/redo object data.
Leadtools.Annotations.Automation.AnnAutomation.Invalidate(LeadRectD) Invalidates the specified region of the automation control.
Leadtools.Annotations.Automation.AnnAutomation.InvalidateObject(AnnObject) Invalidates and re-draws an object.
Leadtools.Annotations.Automation.AnnAutomation.LayerFromSelectedObjects(string) Creates a new layer from the currently selected objects.
Leadtools.Annotations.Automation.AnnAutomation.Lock Locks the object(s) currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.LockObject Occurs when an Leadtools.Annotations.Core.AnnObject is locked.
Leadtools.Annotations.Automation.AnnAutomation.Manager Returns the Leadtools.Annotations.Automation.AnnAutomationManager that this Leadtools.Annotations.Automation.AnnAutomation object belongs to.
Leadtools.Annotations.Automation.AnnAutomation.ObjectModified Occurs when one or more Leadtools.Annotations.Core.AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(AnnPointerEventArgs) Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer down event.
Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(AnnPointerEventArgs) Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer up event.
Leadtools.Annotations.Automation.AnnAutomation.OnCurrentDesignerChanged(EventArgs) Raises the Leadtools.Annotations.Automation.AnnAutomation.CurrentDesignerChanged event.
Leadtools.Annotations.Automation.AnnAutomation.OnShowContextMenu Occurs when the automation needs to show the context menu when no objects are selected.
Leadtools.Annotations.Automation.AnnAutomation.OnShowObjectProperties Occurs when the automation needs to show the properties dialog of the selected object.
Leadtools.Annotations.Automation.AnnAutomation.OnUndoRedoChanged(EventArgs) Raises the Leadtools.Annotations.Automation.AnnAutomation.UndoRedoChanged event.
Leadtools.Annotations.Automation.AnnAutomation.Paste Copies the annotation objects from the clipboard to this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.PasteAt(LeadPointD) Copies the annotation objects from the clipboard to this Leadtools.Annotations.Automation.AnnAutomation at the specified position.
Leadtools.Annotations.Automation.AnnAutomation.PasteStringAt(string,LeadPointD) Copies the annotation objects contained in a serilization object at the specified position.
Leadtools.Annotations.Automation.AnnAutomation.RealizeAllRedactions Realizes all the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.RealizeRedaction Realizes the Leadtools.Annotations.Core.AnnRedactionObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.Redo Reapplies the last operation that was undone in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.ResetRotatePoints Resets the rotate control points of the selected Leadtools.Annotations.Core.AnnObject to their default locations.
Leadtools.Annotations.Automation.AnnAutomation.RestoreAllRedactions Restores all of the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.RestoreCursor Occurs when the automation has determine that the original cursor needs to be restored.
Leadtools.Annotations.Automation.AnnAutomation.RestoreRedaction Restores the Leadtools.Annotations.Core.AnnRedactionObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.Run Occurs when an Leadtools.Annotations.Core.AnnObject is being run.
Leadtools.Annotations.Automation.AnnAutomation.SelectedObjectsChanged Occurs when the selected object changes.
Leadtools.Annotations.Automation.AnnAutomation.SelectLayer(AnnLayer) Selects a layer in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.SelectObject(AnnObject) Select an object in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.SelectObjects(AnnObjectCollection) Selects an object or a group of objects in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.SendLayerToBack(bool) Sends the currently selected layer down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.SendToBack(bool) Sends the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.SetCursor Occurs when the automation has determine that the user needs to change the cursor.
Leadtools.Annotations.Automation.AnnAutomation.ShowContextMenu Displays the automation context menu.
Leadtools.Annotations.Automation.AnnAutomation.ShowObjectContextMenu Displays the object context menu.
Leadtools.Annotations.Automation.AnnAutomation.ShowObjectProperties Shows the object properties
Leadtools.Annotations.Automation.AnnAutomation.ToolTip Occurs when the mouse hovers over an annotation object and a tooltip is requested.
Leadtools.Annotations.Automation.AnnAutomation.Undo Reverses the last operation performed in this Leadtools.Annotations.Automation.AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.UndoCapacity Gets or sets a value that specifies the capacity of the undo/redo buffer.
Leadtools.Annotations.Automation.AnnAutomation.UndoRedoChanged Occurs when the undo or redo buffer changes.
Leadtools.Annotations.Automation.AnnAutomation.Unlock Unlocks the object(s) currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.UnlockObject Occurs when an Leadtools.Annotations.Core.AnnObject is unlocked.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor(object,AnnAutomationObject) Initializes a new instance of AnnAutomationEvent.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.Create(AnnAutomationObject) Creates a new instance of Leadtools.Annotations.Automation.AnnAutomationEventArgs with the specified parameter.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.Object Gets the current selected automation object.
Leadtools.Annotations.Automation.AnnAutomationManager.Automations Gets the collection of Leadtools.Annotations.Automation.AnnAutomation objects in this Leadtools.Annotations.Automation.AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.CancelInactiveDesigners Gets or sets a value indicating whether any designers in an Leadtools.Annotations.Automation.AnnAutomation are automatically canceled when the automation becomes inactive.
Leadtools.Annotations.Automation.AnnAutomationManager.Create(AnnRenderingEngine) Creates a new instance of Leadtools.Annotations.Automation.AnnAutomationManager with the specified rendering engine.
Leadtools.Annotations.Automation.AnnAutomationManager.CreateDefaultObjects Creates the default automation annotation objects.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectId Gets or sets the current automation object ID.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectIdChanged Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectId property changes.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType Gets or sets the current automation rubber stamp object type.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampTypeChanged Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType property changes.
Leadtools.Annotations.Automation.AnnAutomationManager.EditObjectAfterDraw Gets or sets a value that indicates whether newly drawn objects are selected (edited).
Leadtools.Annotations.Automation.AnnAutomationManager.EnableToolTip Gets or sets a value that indicate whether firing the Leadtools.Annotations.Automation.AnnAutomation.ToolTip event is enabled
Leadtools.Annotations.Automation.AnnAutomationManager.ExtendedModeModifierKey Gets or sets the extended mode modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.FindObject(AnnObject) Finds the Leadtools.Annotations.Automation.AnnAutomationObject for a specified Leadtools.Annotations.Core.AnnObject
Leadtools.Annotations.Automation.AnnAutomationManager.FindObjectById(int) Finds the specified Leadtools.Annotations.Automation.AnnAutomationObject by id.
Leadtools.Annotations.Automation.AnnAutomationManager.HitTestBehavior Gets or sets a value that determine how objects are hit-tested through a selection rectangle.
Leadtools.Annotations.Automation.AnnAutomationManager.LoadPackage(IAnnPackage,string) Loads the automation objects from the specified package.
Leadtools.Annotations.Automation.AnnAutomationManager.MaintainAspectRatio Gets or sets a value that indicates whether to preserve the aspect ratio when moving a corner thumb for all Leadtools.Annotations.Designers.AnnEditDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.MultiSelectModifierKey Gets or sets the multi-select modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.Objects Gets the collection of Leadtools.Annotations.Automation.AnnAutomationObject objects in this Leadtools.Annotations.Automation.AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.PlatformCallbacks Gets the platform-specific callbacks for this automation manager.
Leadtools.Annotations.Automation.AnnAutomationManager.RedactionRealizePassword Gets or sets the password to use for realization of Leadtools.Annotations.Core.AnnRedactionObject objects.
Leadtools.Annotations.Automation.AnnAutomationManager.RenderingEngine Gets or sets the rendering engine associated with this Leadtools.Annotations.Automation.AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.RotateModifierKey Gets or sets the rotate modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.RunHitTestBuffer Gets or sets the hit test buffer for all Leadtools.Annotations.Designers.AnnRunDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.ShowThumbs Gets or sets a value that indicates whether to show the thumbs.
Leadtools.Annotations.Automation.AnnAutomationManager.ThumbsGap Gets or sets a value that indicates which thumbs to display in a polyline object.
Leadtools.Annotations.Automation.AnnAutomationManager.ThumbsHitTestBuffer Gets or sets the hit test buffer for all Leadtools.Annotations.Designers.AnnEditDesigner derived classes.
Leadtools.Annotations.Automation.AnnAutomationManager.UserMode Gets or sets the current user mode.
Leadtools.Annotations.Automation.AnnAutomationManager.UserModeChanged Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.UserMode property changes
Leadtools.Annotations.Automation.AnnAutomationObject.ContextMenu Gets or sets the context menu associated with this Leadtools.Annotations.Automation.AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.DrawCursor Gets or sets the mouse cursor used when drawing new objects of this Leadtools.Annotations.Automation.AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.DrawDesignerType Gets or sets the type of the draw designer of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.EditDesignerType Gets or sets the type of the edit designer of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.GroupName Gets or sets the group name for this automation object
Leadtools.Annotations.Automation.AnnAutomationObject.Id Gets or sets the id of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.LabelTemplate Gets or sets the template used when creating labels for this Leadtools.Annotations.Automation.AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.Name Gets or sets the name of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.NextNumber Gets or sets the next number used when creating labels for this Leadtools.Annotations.Automation.AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.ObjectTemplate Gets or sets the initial annotation object template of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.Renderer Gets the annotation object renderer for this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.RunDesignerType Gets or sets the type of the run designer of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarImage Gets or sets the toolbar image associated with this Leadtools.Annotations.Automation.AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarToolTipText Gets or sets the tooltip text associated with this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.UserData Gets or sets the user-defined data for this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.UseRotateThumbs Enables or disables the use of rotate thumbs of this Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType,AnnDesigner) Initializes a new instance of the Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs class.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Cancel Gets or sets a value indicating whether the change should be canceled.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.ChangeType Gets the type of change.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Designer Gets the designer responsible for the change.
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Objects Gets the objects that have been changed.
Leadtools.Annotations.Automation.AnnBooleanEditor - Represents an annotation boolean editor.
Leadtools.Annotations.Automation.AnnColorEditor - Represents an annotation color editor.
Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor(int,AnnDesignerType,int,bool,bool) Initializes a new instance of Leadtools.Annotations.Automation.AnnCursorEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnCursorEventArgs.DesignerType Gets the designer type.
Leadtools.Annotations.Automation.AnnCursorEventArgs.Id Gets the id of the current Leadtools.Annotations.Automation.AnnAutomationObject.
Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateCenter Gets a value that indicate whether the cursor is on the rotate center.
Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateGripper Gets a value that indicate whether the cursor is on the rotate gripper.
Leadtools.Annotations.Automation.AnnCursorEventArgs.ThumbIndex Gets the 0-based thumb index.
Leadtools.Annotations.Automation.AnnDoubleEditor - Represents an annotation double editor.
Leadtools.Annotations.Automation.AnnFontEditor - Represents an annotation font editor.
Leadtools.Annotations.Automation.AnnIntegerEditor - Represents an annotation integer editor.
Leadtools.Annotations.Automation.AnnLengthEditor - Represents an annotation length editor.
Leadtools.Annotations.Automation.AnnMediaEditor - Represents an annotation media editor.
Leadtools.Annotations.Automation.AnnObjectEditor - Represents an annotation object editor.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType) Creates a new instance of Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.ChangeType Gets the type of change.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.Objects Gets the objects that have been modified.
Leadtools.Annotations.Automation.AnnPictureEditor - Represents an annotation picture editor.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.CheckModifier Gets or sets the keyboard modifier callback
Leadtools.Annotations.Automation.AnnPlatformCallbacks.GetClipboardData Gets or sets the callback for getting clipboard.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.IsClipboardDataPresent Gets or sets the callback for checking if clipboard data is present.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.SetClipboardData Gets or sets the callback for setting clipboard data.
Leadtools.Annotations.Automation.AnnPropertyInfo - The Leadtools.Annotations.Automation.AnnPropertyInfo class represents a property of some other LEADTOOLS annotation class.
Leadtools.Annotations.Automation.AnnSolidColorBrushEditor - Represents an annotation solid color brush editor.
Leadtools.Annotations.Automation.AnnStringEditor - Represents an annotation string editor.
Leadtools.Annotations.Automation.AnnStrokeEditor - Represents an annotation stroke editor.
Leadtools.Annotations.Automation.IAnnEditor - Defines an interface with properties and methods for editing the properties of annotation objects.
Leadtools.Annotations.Automation.IAnnPackage.Author Gets the author name of this package.
Leadtools.Annotations.Automation.IAnnPackage.Description Gets a description of this package.
Leadtools.Annotations.Automation.IAnnPackage.FriendlyName Gets the friendly name of this package.
Leadtools.Annotations.Automation.IAnnPackage.GetAutomationObjects Gets an array of the automation objects contained in this package.
Leadtools.Annotations.Automation.ImageViewerAutomationControl - Implements Leadtools.Annotations.Core.IAnnAutomationControl for Leadtools.Controls.ImageViewer.

Version Changes: 17.5 to 18

New Members

The following members have been added to the existing types:

Member Description
Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject The object holding the undo/redo data for an automation object.
Leadtools.Annotations.Automation.AnnAutomation.EndDesigner Ends (and commits) the operation currently being performed in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.AttachContainer(Leadtools.Annotations.Core.AnnContainer,Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject) Attaches this AnnAutomation object to a container and optional undo/redo object.
Leadtools.Annotations.Automation.AnnAutomation.GetUndoRedoObject Gets an object that contains the current undo/redo object data.
Leadtools.Annotations.Automation.AnnAutomation.ApplyEncryptor Applies the encryptor AnnEncryptObject object currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.ApplyDecryptor Applies the decryptor AnnEncryptObject that is currently being edited (selected).
Leadtools.Annotations.Automation.AnnAutomation.ApplyAllEncryptors Applies all the encryptor AnnEncryptObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.ApplyAllDecryptors Applies all the decryptor AnnEncryptObject objects in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.Copy Copies the objects currently being edited to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.Paste Copies the annotation objects from the clipboard to this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.BringToFront(Boolean) Brings the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.SendToBack(Boolean) Sends the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.Flip(Boolean) Flips the objects that are currently being edited (selected) in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.ResetRotatePoints Resets the rotate control points of the selected AnnObject to their default locations.
Leadtools.Annotations.Automation.AnnAutomation.ShowObjectProperties Shows the object properties
Leadtools.Annotations.Automation.AnnAutomation.ShowContextMenu Displays the automation context menu.
Leadtools.Annotations.Automation.AnnAutomation.ShowObjectContextMenu Displays the object context menu.
Leadtools.Annotations.Automation.AnnAutomation.GetObjectInvalidateRect(Leadtools.Annotations.Core.AnnObject) Gets a Leadtools.LeadRectD object that specifies the current physical rectangle of this AnnObject.
Leadtools.Annotations.Automation.AnnAutomation.InvalidateObject(Leadtools.Annotations.Core.AnnObject) Invalidates and re-draws an object.
Leadtools.Annotations.Automation.AnnAutomation.PasteAt(Leadtools.LeadPointD) Copies the annotation objects from the clipboard to this AnnAutomation at the specified location.
Leadtools.Annotations.Automation.AnnAutomation.PasteStringAt(String,Leadtools.LeadPointD) Copies the annotation objects contained in a serialization object at the specified position.
Leadtools.Annotations.Automation.AnnAutomation.SendLayerToBack(Boolean) Sends the currently selected layer down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.BringLayerToFront(Boolean) Brings the currently selected layer up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.SelectLayer(Leadtools.Annotations.Core.AnnLayer) Selects a layer in this AnnAutomation.
Leadtools.Annotations.Automation.AnnAutomation.LayerFromSelectedObjects(String) Creates a new layer from the currently selected objects.
Leadtools.Annotations.Automation.AnnAutomation.AddLayer(Leadtools.Annotations.Core.AnnLayer,Leadtools.Annotations.Core.AnnLayer) Adds a layer to the container.
Leadtools.Annotations.Automation.AnnAutomation.DeleteLayer(Leadtools.Annotations.Core.AnnLayer,Boolean) Deletes a layer from the container
Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(Leadtools.Annotations.Core.AnnPointerEventArgs) Called by the IAnnAutomationControl pointer down event.
Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(Leadtools.Annotations.Core.AnnPointerEventArgs) Called by the IAnnAutomationControl pointer up event.
Leadtools.Annotations.Automation.AnnAutomation.ToolTip Occurs when the mouse hovers over an annotation object and a tooltip is requested.
Leadtools.Annotations.Automation.AnnAutomation.AfterObjectChanged Occurs when an AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.ObjectModified Occurs when one or more AnnObject has changed.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyEncryptor Gets a value that indicates whether the object currently being edited (selected) is an encryptor AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyDecryptor Gets a value that indicates whether the object currently being edited is a decryptor AnnEncryptObject and can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllEncryptors Gets a value that indicates whether any encryptor AnnEncryptObject object in this AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllDecryptors Gets a value that indicates whether any decryptor AnnEncryptObject object in this AnnAutomation can be applied.
Leadtools.Annotations.Automation.AnnAutomation.CanGroup Gets a value indicating whether this AnnAutomation is in a state where objects can be grouped together.
Leadtools.Annotations.Automation.AnnAutomation.CanUngroup Gets a value indicating whether this AnnAutomation is in a state where objects can be ungrouped.
Leadtools.Annotations.Automation.AnnAutomation.CanCopy Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be copied to the clipboard.
Leadtools.Annotations.Automation.AnnAutomation.CanPaste Gets a value that indicates whether the clipboard contains annotation objects that can be pasted.
Leadtools.Annotations.Automation.AnnAutomation.CanBringToFront Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) up in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringToFirst Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) to the top of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendToBack Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) down in the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendToLast Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) to the bottom of the Z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanFlip Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be flipped.
Leadtools.Annotations.Automation.AnnAutomation.CanResetRotatePoints Gets a value that indicates whether this AnnAutomation is currently in a state where the selected AnnObject is able to have its rotate control points reset to the default location.
Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectProperties Gets a value that indicates whether this AnnAutomation is currently in a state where the object properties can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.OnShowObjectProperties Occurs when the automation needs to show the properties dialog of the selected object.
Leadtools.Annotations.Automation.AnnAutomation.OnShowContextMenu Occurs when the automation needs to show the context menu when no objects are selected.
Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectContextMenu Gets a value that indicates whether this AnnAutomation is currently in a state where the object context menu can be displayed.
Leadtools.Annotations.Automation.AnnAutomation.CanSelectNone Gets a value indicating whether this AnnAutomation is in a state where it can deselect objects.
Leadtools.Annotations.Automation.AnnAutomation.SetCursor Occurs when the automation has determine that the user needs to change the cursor.
Leadtools.Annotations.Automation.AnnAutomation.RestoreCursor Occurs when the automation has determine that the original cursor needs to be restored.
Leadtools.Annotations.Automation.AnnAutomation.DeserializeObjectError Occurs when an error occur during an object serialization operation.
Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToLast Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent to end of the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToBack Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent down the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFront Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up the z-order.
Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFirst Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order.
Leadtools.Annotations.Automation.AnnGetClipboardDataCallback Callback to get the current annotation data for a clipboard paste operation.
Leadtools.Annotations.Automation.AnnSetClipboardDataCallback Callback to set the current annotation data for a clipboard copy operation.
Leadtools.Annotations.Automation.AnnIsClipboardDataPresentCallback Callback to determine whether a clipboard paste operation can be performed.
Leadtools.Annotations.Automation.AnnPlatformCallbacks Platform-specific callbacks used by the automation manager.
Leadtools.Annotations.Automation.AnnPlatformCallbacks (Constructor) Creates a new instance of AnnPlatformCallbacks
Leadtools.Annotations.Automation.AnnPlatformCallbacks.CheckModifier Gets or sets the keyboard modifier callback
Leadtools.Annotations.Automation.AnnPlatformCallbacks.GetClipboardData Gets or sets the callback for getting clipboard.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.SetClipboardData Gets or sets the callback for setting clipboard data.
Leadtools.Annotations.Automation.AnnPlatformCallbacks.IsClipboardDataPresent Gets or sets the callback for checking if clipboard data is present.
Leadtools.Annotations.Automation.AnnAutomationManager.Create(Leadtools.Annotations.Core.AnnRenderingEngine) Creates a new instance of AnnAutomationManager with the specified rendering engine.
Leadtools.Annotations.Automation.AnnAutomationManager.FindObject(Leadtools.Annotations.Core.AnnObject) Finds the AnnAutomationObject for a specified AnnObject
Leadtools.Annotations.Automation.AnnAutomationManager.LoadPackage(Leadtools.Annotations.Automation.IAnnPackage,String) Loads the automation objects from the specified package.
Leadtools.Annotations.Automation.AnnAutomationManager.RenderingEngine Gets or sets the rendering engine associated with this AnnAutomationManager.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampTypeChanged Occurs when the value of the CurrentRubberStampType property changes.
Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType Gets or sets the current automation rubber stamp object type.
Leadtools.Annotations.Automation.AnnAutomationManager.RotateModifierKey Gets or sets the rotate modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.ExtendedModeModifierKey Gets or sets the extended mode modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.MultiSelectModifierKey Gets or sets the multi-select modifier key.
Leadtools.Annotations.Automation.AnnAutomationManager.HitTestBehavior Gets or sets a value that determine how objects are hit-tested through a selection rectangle.
Leadtools.Annotations.Automation.AnnAutomationManager.EnableToolTip Gets or sets a value that indicate whether firing the ToolTip event is enabled
Leadtools.Annotations.Automation.AnnAutomationManager.PlatformCallbacks Gets the platform-specific callbacks for this automation manager.
Leadtools.Annotations.Automation.AnnAutomationObject.UserData Gets or sets the user-defined data for this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarToolTipText Gets or sets the tooltip text associated with this AnnAutomationObject.
Leadtools.Annotations.Automation.AnnAutomationObject.DrawCursor Gets or sets the mouse cursor used when drawing new objects of this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.ContextMenu Gets or sets the context menu associated with this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarImage Gets or sets the toolbar image associated with this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.NextNumber Gets or sets the next number used when creating labels for this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.LabelTemplate Gets or sets the template used when creating labels for this AnnAutomationObject
Leadtools.Annotations.Automation.AnnAutomationObject.GroupName Gets or sets the group name for this automation object
Leadtools.Annotations.Automation.AnnIntegerEditor Represents an annotation integer editor.
Leadtools.Annotations.Automation.AnnIntegerEditor(Int32,String) (Constructor) Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor.
Leadtools.Annotations.Automation.AnnIntegerEditor.Properties Gets the list of properties that are available for editing.
Leadtools.Annotations.Automation.AnnIntegerEditor.Category Gets the category of this editor.
Leadtools.Annotations.Automation.AnnIntegerEditor.OnValueChanged Occurs when the value has changed.
Leadtools.Annotations.Automation.AnnIntegerEditor.Value Gets or sets the value.
Leadtools.Annotations.Automation.AnnPictureEditor Represents an annotation picture editor.
Leadtools.Annotations.Automation.AnnPictureEditor(Leadtools.Annotations.Core.AnnPicture,String) (Constructor) Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor.
Leadtools.Annotations.Automation.AnnPictureEditor.Properties Gets the list of properties that are available for editing.
Leadtools.Annotations.Automation.AnnPictureEditor.Category Gets the category of this editor.
Leadtools.Annotations.Automation.AnnPictureEditor.OnValueChanged Occurs when the value has changed.
Leadtools.Annotations.Automation.AnnPictureEditor.Value Gets or sets the value.
Leadtools.Annotations.Automation.AnnMediaEditor Represents an annotation media editor.
Leadtools.Annotations.Automation.AnnMediaEditor(Leadtools.Annotations.Core.AnnMedia,String) (Constructor) Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor.
Leadtools.Annotations.Automation.AnnMediaEditor.Properties Gets the list of properties that are available for editing.
Leadtools.Annotations.Automation.AnnMediaEditor.Category Gets the category of this editor.
Leadtools.Annotations.Automation.AnnMediaEditor.OnValueChanged Occurs when the value has changed.
Leadtools.Annotations.Automation.AnnMediaEditor.Value Gets or sets the value.
Leadtools.Annotations.Automation.IAnnPackage Provide support for packaging a group of annotation objects.
Leadtools.Annotations.Automation.IAnnPackage.GetAutomationObjects Gets an array of the automation objects contained in this package.
Leadtools.Annotations.Automation.IAnnPackage.Author Gets the author name of this package.
Leadtools.Annotations.Automation.IAnnPackage.Description Gets a description of this package.
Leadtools.Annotations.Automation.IAnnPackage.FriendlyName Gets the friendly name of this package.
Leadtools.Annotations.Automation.ImageViewerAutomationControl(Leadtools.Controls.ImageViewer,Leadtools.Annotations.Core.AnnRenderingEngine) (Constructor) Creates a new instance of IAnnAutomationControl for the ImageViewer
Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleLostFocus(Leadtools.Html.ElementEvent) Must be called by the application when the control loses the focus.
Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleGotFocus(Leadtools.Html.ElementEvent) Must be called by the application when the control receives the focus.
Leadtools.Annotations.Automation.ImageViewerAutomationControl.PutImageData(Leadtools.Html.ImageData,Leadtools.LeadPointD) Puts the image data in the specified area in the image inside the control.
Leadtools.Annotations.Automation.AnnObjectChangedType.Added An object is added.
Leadtools.Annotations.Automation.AnnObjectChangedType.Modified An object is modified.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs Provides data for the AnnAutomation.AfterObjectChanged event.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType,Leadtools.Annotations.Designers.AnnDesigner) (Constructor) Initializes a new instance of the AnnAfterObjectChangedEventArgs class.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Objects Gets the objects that have been changed.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.ChangeType Gets the type of change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Designer Gets the designer responsible for the change.
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Cancel Gets or sets a value indicating whether the change should be canceled.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs Provides data for the ObjectModified event.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType) (Constructor) Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.Objects Gets the objects that have been modified.
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.ChangeType Gets the type of change.
Leadtools.Annotations.Automation.AnnAutomationEventArgs Provides data for the AnnAutomation.OnShowContextMenu and AnnAutomation.OnShowContextMenu events.
Leadtools.Annotations.Automation.AnnAutomationEventArgs (Constructor) Initializes a new instance of AnnAutomationEventArgs.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.Create(Leadtools.Annotations.Automation.AnnAutomationObject) Creates a new instance of AnnAutomationEventArgs with the specified parameter.
Leadtools.Annotations.Automation.AnnAutomationEventArgs.Object Gets the current selected automation object.
Leadtools.Annotations.Automation.AnnDesignerType Defines an annotation designer type.
Leadtools.Annotations.Automation.AnnDesignerType.None None
Leadtools.Annotations.Automation.AnnDesignerType.Draw The designer is AnnDrawDesigner
Leadtools.Annotations.Automation.AnnDesignerType.Run The designer is AnnRunDesigner
Leadtools.Annotations.Automation.AnnDesignerType.Edit The designer is AnnEditDesigner
Leadtools.Annotations.Automation.AnnCursorEventArgs Provides data for the AnnAutomation.SetCursor event.
Leadtools.Annotations.Automation.AnnCursorEventArgs(Int32,Leadtools.Annotations.Automation.AnnDesignerType,Int32,Boolean,Boolean) (Constructor) Initializes a new instance of AnnCursorEventArgs with the specified parameters.
Leadtools.Annotations.Automation.AnnCursorEventArgs.Id Gets the id of the current AnnAutomationObject.
Leadtools.Annotations.Automation.AnnCursorEventArgs.DesignerType Gets the designer type.
Leadtools.Annotations.Automation.AnnCursorEventArgs.ThumbIndex Gets the 0-based thumb index.
Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateCenter Gets a value that indicate whether the cursor is on the rotate center.
Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateGripper Gets a value that indicate whether the cursor is on the rotate gripper.

Leadtools.Annotations.Automation JavaScript Changes from Version 17.5 to Version 18

New Types

The following types have been added in LEADTOOLS v18:

Type Description
Leadtools.Annotations.Automation.AnnAutomation.EndDesigner JavaScript Ends and commits the operation currently being performed by the AnnAutomation.

Leadtools.Annotations.Automation JavaScript Changes from Version 17 to Version 17.5

New Library

The following Library has been added to LEADTOOLS For .NET v17.5:

Namespace Description
Leadtools.Annotations.Automation JavaScript Contains classes for implementing automated mode annotations (with end-user interaction).
Help Version 19.0.2017.10.27
Products | Support | Contact Us | Copyright Notices
© 1991-2017 LEAD Technologies, Inc. All Rights Reserved.
LEADTOOLS HTML5 JavaScript