This topic and its replies were posted before the current version of LEADTOOLS was released and may no longer be applicable.
#1
Posted
:
Thursday, July 21, 2005 5:27:49 PM(UTC)
Groups: Registered
Posts: 5
Has anyone been successful in implementing scanning with ver. 14? I've had an application that worked just fine with ver. 13 ActiveX. I've converted it to ver. 14 COM and nothing seems to work. The program either throws errors or VB6 would just disappear, no errors.
I've spent several days on this. I have the latest patches, examples, etc.
I don't need much. Here's what I am trying to do:
1. Initialize TWAIN.
2. Set scanner.
3. Set color (color/grayscale/bw)
4. Set resolution (300, 600, etc.)
5. Set size (letter, legal, 4x6).
6. Set duplex (on/off).
7. Scan.
8. Close TWAIN.
That's it. Help, please. Thanks.
--DT
#2
Posted
:
Wednesday, July 27, 2005 10:55:20 AM(UTC)
Groups: Guests
Posts: 3,022
Was thanked: 2 time(s) in 2 post(s)
Thank you for contacting LEADTOOLS. The major difference between V13 and V14 is that you need to set all of the scanners properties through TWAIN capabilties. We allow you to get/set almost all capabilties from the TWAIN specification (www.twain.org).
I have attached a V14 COM example that will show you how to initialize a TWAIN session, select a source, set the pixel type/bitdepth, and scan a page. As for the other properties, these can be negotiated in the same manner.
#3
Posted
:
Thursday, July 28, 2005 5:19:25 AM(UTC)
Groups: Registered
Posts: 5
Thank you very much for your reply and for your code. Do you think you could augment it with an example that would show how to set the scanning area to 8.5 x 11?
--DT
Edited by moderator Thursday, October 20, 2016 10:26:00 AM(UTC)
| Reason: Removed defunct emoticon
#4
Posted
:
Thursday, July 28, 2005 11:21:03 AM(UTC)
Groups: Guests
Posts: 3,022
Was thanked: 2 time(s) in 2 post(s)
I have attached an example that will help you set the scannable area.
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.