Welcome Guest! To enable all features, please Login or Register.

Notification

Icon
Error

Options
View
Last Go to last post Unread Go to first unread post
#1 Posted : Thursday, August 9, 2007 3:06:21 AM(UTC)

Zouhair  
Zouhair

Groups: Registered
Posts: 3


Hi,

i would like configure my scanner from my UI, that s it s possible but i can t use all the capabilities of my scanner; i have this message" the capability is not supported ".

i developp with c# and leadtools 14.5

 

Best regards

 

Try the latest version of LEADTOOLS for free for 60 days by downloading the evaluation: https://www.leadtools.com/downloads

Wanna join the discussion? Login to your LEADTOOLS Support accountor Register a new forum account.

#2 Posted : Thursday, August 9, 2007 7:20:21 AM(UTC)

Zouhair  
Zouhair

Groups: Registered
Posts: 3


 

 I tested the demo version 15, it s a same.

 

 
#3 Posted : Sunday, August 12, 2007 8:43:31 AM(UTC)

Amin  
Amin

Groups: Manager, Tech Support
Posts: 356


Zouhair,
Does your scanner's Twain driver support the capability that gives you this error? If want to check, you can use a utility from the TWAIN working group called Twacker. You can set and get capabilities for scanners using this program, in addition to perform scanning. Please try it if you haven't done so already to make sure the problem is not in the driver. If you don't have it, you can get it from:
http://www.twain.org/devfiles/twack.zip

Use it to set and get the same capabilities and values that fail with LEADTOOLS.

Amin Dodin

Senior Support Engineer
LEAD Technologies, Inc.
LEAD Logo
 
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2020, Yet Another Forum.NET
This page was generated in 0.134 seconds.