Welcome Guest! To enable all features, please Login or Register.



Last Go to last post Unread Go to first unread post
#1 Posted : Wednesday, January 17, 2007 2:39:24 AM(UTC)
Raymond Lee

Groups: Registered
Posts: 30


In leadtools.NET 14.1, which properties can help us to determine whether scanner is using memory mode for image transfer and determine compression is on/off for the transfer image.

Thanks for your kind attention,



Try the latest version of LEADTOOLS for free for 60 days by downloading the evaluation: https://www.leadtools.com/downloads

Wanna join the discussion? Login to your LEADTOOLS Support accountor Register a new forum account.

#2 Posted : Thursday, January 18, 2007 4:20:15 PM(UTC)


Groups: Manager, Tech Support
Posts: 367

To find out which transfer mode and compression type (if any) are currently active, you can get the values of the ICAP_XFERMECH and ICAP_COMPRESSION capabilities, respectively.
In our .NET toolkit, these capabilities are called ImageTranserMechanism and ImageCompression.

About using them in build 14.1 of the toolkit, this should work, but we recommend getting the latest patches that contain build 14.5.????.

Amin Dodin

Senior Support Engineer
LEAD Technologies, Inc.
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2023, Yet Another Forum.NET
This page was generated in 0.053 seconds.