Welcome Guest! To enable all features, please Login or Register.

Notification

Icon
Error

Options
View
Last Go to last post Unread Go to first unread post
#1 Posted : Monday, July 9, 2012 2:26:35 AM(UTC)
JOO HYUN YOON

Groups: Registered
Posts: 16


I tested Capture Sample using .net version on Win 7 64bit PC.(32bit supoort version)

When I just connect video device(preview ON), and connect audio device. After connecting audio device, we cannot watch preview.(display change to black.)

I tested AMCAP.exe also. However I cannot watch audio source in AMCAP list.(There is only video source.)

Of course, there are all audio source with other PCs using AMCAP.

I think, the audio devices have some problems.
Do I have any method to check the status of audio device?
 

Try the latest version of LEADTOOLS for free for 60 days by downloading the evaluation: https://www.leadtools.com/downloads

Wanna join the discussion? Login to your LEADTOOLS Support accountor Register a new forum account.

#2 Posted : Monday, July 9, 2012 7:33:23 AM(UTC)

Ibrahim  
Guest

Groups: Guests
Posts: 3,040

Was thanked: 1 time(s) in 1 post(s)

I'm afraid that our toolkit doesn't have a method to check the status of an audio device.
About the problem you are facing, try to re-install the audio device driver. Also, please make sure that you are setting the mode of capturing to Video and Audio. You can set this by selecting Video and Audio from Capture menu. Also, make sure that you are previewing both devices. You can do that by selecting preview from the Options menu, then select preview sources and choose Video and Audio.
 
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2019, Yet Another Forum.NET
This page was generated in 0.092 seconds.