EnableErrorCheck Property (OneDBarcodeReadOptions)

[DisplayNameAttribute("Use check digit error")]
[DefaultValueAttribute()]
[DescriptionAttribute("Enables or disables the use of an error check digit while reading a barcode")]
[CategoryAttribute("		Error Checking and Correction")]
public bool EnableErrorCheck {get; set;}

'Declaration
 
<DisplayNameAttribute("Use check digit error")>
<DefaultValueAttribute()>
<DescriptionAttribute("Enables or disables the use of an error check digit while reading a barcode")>
<CategoryAttribute("		Error Checking and Correction")>
Public Property EnableErrorCheck As Boolean

'Usage
 
Dim instance As OneDBarcodeReadOptions
Dim value As Boolean
 
instance.EnableErrorCheck = value
 
value = instance.EnableErrorCheck

[DisplayNameAttribute("Use check digit error")]
[DefaultValueAttribute()]
[DescriptionAttribute("Enables or disables the use of an error check digit while reading a barcode")]
[CategoryAttribute("		Error Checking and Correction")]
public bool EnableErrorCheck {get; set;}

@property (nonatomic, assign) BOOL enableErrorCheck;

public boolean getEnableErrorCheck()
public void setEnableErrorCheck(boolean value)
            

DisplayNameAttribute("Use check digit error")
DefaultValueAttribute()
DescriptionAttribute("Enables or disables the use of an error check digit while reading a barcode")
CategoryAttribute("		Error Checking and Correction")
 
get_EnableErrorCheck();
set_EnableErrorCheck(value);
Object.defineProperty('EnableErrorCheck'); 

[DisplayNameAttribute("Use check digit error")]
[DefaultValueAttribute()]
[DescriptionAttribute("Enables or disables the use of an error check digit while reading a barcode")]
[CategoryAttribute("		Error Checking and Correction")]
public:
property bool EnableErrorCheck {
   bool get();
   void set (    bool value);
}

Property Value

If you set the value of EnableErrorCheck to true, then the engine will perform error checking (CRC) using the optional check word and the barcode data before returning the barcode found. If the check failed, no barcode is returned.

The EnableErrorCheck property setting will only have effect when reading barcode symbologies that support an optional check word. These barcode symbologies are listed below:

• Code 3 of 9 (Code 39) (BarcodeSymbology.Code3Of9)

• Standard 2 of 5 (Industrial 2 of 5) (BarcodeSymbology.CodeStandard2Of5)

• Interleaved 2 of 5 (BarcodeSymbology.CodeInterleaved2Of5)

• Code 11 (USD-8) (BarcodeSymbology.Code11)

• CODABAR (Ames Code/USD-4/NW-7/2 of 7) (BarcodeSymbology.Codabar)

The rest of the symbologies supported by this options class requires the check word to be valid and checking is not optional. The engine will always check the check word against the data regardless of the value of EnableErrorCheck.

For an example, refer to OneDBarcodeReadOptions.

Target Platforms

Reference

OneDBarcodeReadOptions Class
OneDBarcodeReadOptions Members