L_LoadMemoryTile

#include "l_bitmap.h"

L_LTFIL_API L_INT L_LoadMemoryTile(pBuffer, pBitmap, uStructSize, nCol, nRow, uWidth, uHeight, nBitsPerPixel, nOrder, uFlags, pfnCallback, pUserData, nBufferSize, pLoadOptions, pFileInfo)

L_UCHAR* pBuffer;

/* pointer to the file in memory to be loaded */

pBITMAPHANDLE pBitmap;

/* pointer to the bitmap handle */

L_UINT uStructSize;

/* size in bytes, of the structure pointed to by pBitmap */

L_INT nCol;

/* left column of tile */

L_INT nRow;

/* top row of tile */

L_UINT uWidth;

/* width of the tile in pixels */

L_UINT uHeight;

/* height of the tile in pixels */

L_INT nBitsPerPixel;

/* resulting bitmap pixel depth */

L_INT nOrder;

/* desired color order */

L_UINT uFlags;

/* flags that determine function behavior */

FILEREADCALLBACK pfnCallback;

/* optional callback function */

L_VOID* pUserData;

/* pointer to more parameters for the callback */

L_SSIZE_T nBufferSize;

/* size of the file in memory (in bytes) */

pLOADFILEOPTION pLoadOptions;

/* pointer to optional extended load options */

pFILEINFO pFileInfo;

/* pointer to a structure */

Loads a section of an image file (any format), using a callback function. The section begins at (nCol, nRow) and extends uWidth pixels across and uHeight pixels down.

Parameter

Description

pBuffer

Pointer to the file in memory to be loaded.

pBitmap

Pointer to the bitmap handle for the loaded data.

uStructSize

Size in bytes, of the structure pointed to by pBitmap, for versioning. Use sizeof(BITMAPHANDLE).

nCol

Left column number of tile.

nRow

Top row number of tile.

uWidth

Tile width in pixels.

uHeight

Tile height in pixels.

nBitsPerPixel

Resulting bitmap pixel depth. The following are valid values:

 

Value

Meaning

 

0

Keep the original file's pixel depth (Do not convert). A special note about loading 12 and 16-bit grayscale images.

 

1 to 8

The specified bits per pixel in the resultant bitmap

 

12

12 bits per pixel in the resultant bitmap.

 

16

16 bits per pixel in the resultant bitmap

 

24

24 bits per pixel in the resultant bitmap

 

32

32 bits per pixel in the resultant bitmap

 

48

48 bits per pixel in the resultant bitmap

 

64

64 bits per pixel in the resultant bitmap

 

nOrder

The desired color order. Possible values are:

 

Value

Meaning

 

ORDER_RGB

[0] Red-green-blue order.

 

ORDER_BGR

[1] Blue-green-red order.

 

ORDER_GRAY

[2] 12 or 16-bit grayscale image. 12 and 16-bit grayscale images are only supported in  Document and Medical Imaging toolkits.

 

0

The data is 8 bits per pixel or less.

 

ORDER_RGBORGRAY

[3] Load the image as red, green, blue OR as a 12 or 16-bit grayscale image. 12 and 16-bit grayscale images are supported in  Document and Medical Imaging toolkits.

 

ORDER_BGRORGRAY

[4] Load the image as blue, green, red OR as a 12 or 16-bit grayscale image. 12 and 16-bit grayscale images are supported in Document and Medical Imaging toolkits.

 

ORDER_ROMM

[5] ROMM order. ROMM only supports 24 and 48-bit images.

 

ORDER_BGRORGRAYORROMM

[6] Load the image as red, green, blue OR as a 12 or 16-bit grayscale image OR as ROMM. 12 and 16-bit grayscale images are supported in  Document and Medical Imaging toolkits. ROMM only supports 24 and 48-bit color images.

uFlags

Binary flags that determine the behavior of L_LoadMemoryTile. You can specify one or more of the following values:

 

Value

Meaning

 

LOADFILE_ALLOCATE

[0x0001] The function allocates memory for the specified bitmap. (Setting the LOADFILE_STORE flag will override this flag.)

 

LOADFILE_STORE

[0x0002] The function loads data into the specified bitmap. (This takes place in addition to the actions of your callback function.)

 

LOADFILE_FIXEDPALETTE

[0x0004] This flag will force a palletized image to be dithered to a fixed palette.

 

LOADFILE_NOINTERLACE

[0x0008] The function passes image data in the order that is displayed, regardless of how it is stored in the file. (Set this flag if your program does not handle interlaced file formats.)

 

LOADFILE_ALLPAGES

[0x0010] The function loads all pages of a multi-page file. Use this flag only if you are creating a bitmap list using the L_AppendPlayback function.

 

LOADFILE_NOINITBITMAP

[0x0020] The function does not initialize the bitmap handle when it loads the file. Use this flag only if you are supplying all of the required information in the BITMAPHANDLE structure.

 

LOADFILE_COMPRESSED

[0x0040] (Document and Medical Imaging toolkits) If possible, load the file as a 1-bit RLE-compressed image. For more information, refer to Speeding Up 1-Bit Documents.

 

LOADFILE_SUPERCOMPRESSED

[0x0080] (Document and Medical Imaging toolkits) Load 1-bit or 24-bit images as super compressed. This flag is ignored if the bitmaps are not loaded as 1-bit or 24-bit.

pfnCallback

Optional callback function for additional processing.

 

If you do not provide a callback function, use NULL as the value of this parameter.

 

If you do provide a callback function, use the function pointer as the value of this parameter.

 

The callback function must adhere to the function prototype described in FILEREADCALLBACK Function.

pUserData

Void pointer that you can use to pass one or more additional parameters that the callback function needs.

 

To use this feature, assign a value to a variable or create a structure that contains as many fields as you need. Then, in this parameter, pass the address of the variable or structure, casting it to L_VOID  *. The callback function, which receives the address in its own pUserData parameter, can cast it to a pointer of the appropriate data type to access your variable or structure.

 

If the additional parameters are not needed, you can pass NULL in this parameter.

nBufferSize

Size of the file in memory (in bytes).

pLoadOptions

Pointer to optional extended load options. Pass NULL to use the default load options.

pFileInfo

Pointer to a FILEINFO structure. This structure may contain file information used in loading an image, or it may be updated with information about the file being loaded.

 

If nothing is known about the file, pass NULL for this parameter, or declare a variable of type FILEINFO and set the FILEINFO.Flags to 0, then pass the address of the FILEINFO structure in this parameter. In this case, if the address of a FILEINFO structure is passed, the FILEINFO structure will be updated with the results of L_FileInfo.

 

If only the file type is known, set pFileInfo.Format to the file type and set pFileInfo.Flags to FILEINFO_FORMATVALID. This can also be done if L_FileInfo has been called previously, but values that affect the size of the image loaded have been changed (for example, by calling L_SetPCDResolution or L_SetWMFResolution). In this case the FILEINFO structure pointed to by pFileInfo will be updated with the results of L_FileInfo.

 

If L_FileInfo has been called prior to calling this function, and no changes have been made to the contents of the structure filled by L_FileInfo, then the address of the filled FILEINFO structure can be passed for this parameter. In this case, the FILEINFO.Flags member should be set to FILEINFO_INFOVALID. The L_FileInfo function will set the FILEINFO.Flags to FILEINFO_INFOVALID. In this case the load will be faster since this function does not have to query the file filters for the file type.

 

Note: Local variables are not initialized (since they are placed on the stack). So if you have a FILEINFO structure as a local variable, the value of its Flags parameter is undefined, possibly having FILEINFO_INFOVALID or FILEINFO_FORMATVALID set. That is why it is important to initialize FILEINFO.Flags before passing the address of the FILEINFO structure to the function.

Returns

SUCCESS

The function was successful.

< 1

An error occurred. Refer to Return Codes.

Comments

Note:

More options are available in the LOADFILEOPTION structure.

Support for 12 and 16-bit grayscale images is only available in the Document and Medical Imaging toolkits.

This function is very similar to L_LoadFileTile, except that it loads the image from a buffer instead of a file.

Required DLLs and Libraries

LTFIL
File format DLLs

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Win32, x64, Mobile.

See Also

Functions:

L_LoadFileTile, L_SaveFileTile, L_DlgOpen, L_SetLoadInfoCallback, L_SetLoadResolution, L_SetPCDResolution, L_SetWMFResolution
For Vector files: L_2DGetViewMode, L_2DGetViewPort, L_2DSetViewMode, L_2DSetViewPort, L_GetLoadStatus

Topics:

Raster Image Functions: Loading Files,

 

Loading and Saving Images

 

For a list of functions that utilize the LOADFILEOPTION or SAVEFILEOPTION structures, refer to Functions Utilizing the LOADFILEOPTION or SAVEFILEOPTION structures.

Example

Load a portion of an image without loading the entire image.

// read the file into the buffer. The error checking is reduced for clarity
L_INT ReadFileIntoBuffer(L_UCHAR *pBuffer, L_SSIZE_T nBufferSize, L_TCHAR *pszFile)
{
   DWORD dwBytesRead;
   HANDLE hFile = CreateFile(pszFile, GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
   if(hFile == INVALID_HANDLE_VALUE)
      return ERROR_FILENOTFOUND;
   ReadFile(hFile, pBuffer, (DWORD)nBufferSize, &dwBytesRead, NULL);
   CloseHandle(hFile);
   return SUCCESS;
}
 
L_INT LoadMemoryTileExample(L_VOID)
{
   L_INT nRet;
   BITMAPHANDLE Bitmap;
   FILEINFO FileInfo;
   L_UCHAR *pBuffer;    /* Pointer to the data in memory       */
   TCHAR *pszFileName = MAKE_IMAGE_PATH(TEXT("clean.tif"));
   memset(&FileInfo, 0, sizeof(FILEINFO));
   FileInfo.uStructSize = sizeof(FileInfo);
   nRet = L_FileInfo(pszFileName, &FileInfo, sizeof(FILEINFO), 0, NULL);
   if(nRet != SUCCESS)
      return nRet;
   // allocate a memory buffer large enough to contain the file
   pBuffer = (L_UCHAR*)malloc(FileInfo.SizeDisk);
   if(!pBuffer)
      return ERROR_NO_MEMORY;
   nRet = ReadFileIntoBuffer(pBuffer, FileInfo.SizeDisk, pszFileName);
   if(nRet != SUCCESS)
   {
      free(pBuffer);
      return nRet;
   }
   // Load 1/2 from an image (center)
   nRet = L_LoadMemoryTile(pBuffer, &Bitmap, sizeof(BITMAPHANDLE), FileInfo.Width/4, FileInfo.Height/4, (FileInfo.Width)/2, (FileInfo.Height)/2, 0, ORDER_BGR, LOADFILE_ALLOCATE | LOADFILE_STORE, NULL, NULL, FileInfo.SizeDisk, NULL, &FileInfo);
   if(nRet != SUCCESS)
   {
      free(pBuffer);
      return nRet;
   }
   free(pBuffer); // free the memory buffer, as we are done with it
   nRet = L_SaveBitmap(MAKE_IMAGE_PATH(TEXT("Result.BMP")), &Bitmap, FILE_BMP, 24, 0, NULL);
   if(nRet != SUCCESS)
      return nRet;
   if(Bitmap.Flags.Allocated)
      L_FreeBitmap(&Bitmap);
   return SUCCESS;
}