AnnPointObject Object

Summary

Defines an annotation point object.

Syntax
TypeScript
JavaScript
function lt.Annotations.Engine.AnnPointObject 
	extends lt.Annotations.Engine.AnnObject 
	implements IAnnObjectCloneable 
class lt.Annotations.Engine.AnnPointObject() 
	extends AnnObject 
	implements IAnnObjectCloneable 

Remarks

The point object is a single point. This object works in two ways: If the value of ShowPicture is true; this object draws the picture in Picture with CenterPoint as the center point. AnnObject.Fill, AnnObject.Stroke and Radius will be ignored. If ShowPicture is false; this object will draw an ellipse using Stroke and Radius around CenterPoint.

With the automated functions, in design mode, each point is formed with a click or tap event.

Programmatically, the boundaries and location of the point object can be controlled using the following properties:

Each object can be transformed with the following methods:

The AnnPointObject class inherits a number of properties from the AnnObject class, providing support for font, stroke and fill characteristics. These properties are listed below:

The name of the point object can be controlled using Labels property, inherited from the AnnObject class. An object can be part of a group annotation object or part of a container object. It cannot be part of both a group and a container at the same time. The following properties can also be used to programmatically set characteristics of an AnnPointObject:

Example

This example creates a point object and adds it to the automation container.

AnnPoint.ts
EngineHelper.ts
AnnPoint.js
EngineHelper.js
AnnPoint.html
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObjects_Point { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.create); 
   } 
 
   create = (automation: lt.Annotations.Automation.AnnAutomation) => { 
      const inch: number = 720.0; 
      // Add a point object 
      const pointObj: lt.Annotations.Engine.AnnPointObject = new lt.Annotations.Engine.AnnPointObject(); 
      // Set the point for the pointer 
      pointObj.centerPoint = lt.LeadPointD.create(1 * inch, 1 * inch); 
      // Set the radius 
      pointObj.radius = lt.LeadLengthD.create(75); 
      // Hide the picture 
      pointObj.showPicture = false; 
      // Add the object to the automation container 
      automation.container.children.add(pointObj); 
      // Select the object 
      automation.selectObject(pointObj); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   protected _automation: lt.Annotations.Automation.AnnAutomation = null; 
   // Image viewer 
   protected _viewer: lt.Controls.ImageViewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/v200/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   public run(callback?: (automation: lt.Annotations.Automation.AnnAutomation, viewer: lt.Controls.ImageViewer) => void): void { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions: lt.Controls.ImageViewerCreateOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer: lt.Controls.ImageViewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom: lt.Controls.ImageViewerPanZoomInteractiveMode = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl: lt.Demos.Annotations.ImageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode: lt.Demos.Annotations.AutomationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine: lt.Annotations.Rendering.AnnHtml5RenderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager: lt.Annotations.Automation.AnnAutomationManager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect") as HTMLSelectElement; 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount: number = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj: lt.Annotations.Automation.AnnAutomationObject = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name: string = automationObj.name; 
         const id: string = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id: number = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId: number = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id: number = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation: lt.Annotations.Automation.AnnAutomation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container: lt.Annotations.Engine.AnnContainer = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider: lt.Demos.Annotations.CanvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObjects_Point { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.create); 
   } 
 
   create = (automation) => { 
      const inch = 720.0; 
      // Add a point object 
      const pointObj = new lt.Annotations.Engine.AnnPointObject(); 
      // Set the point for the pointer 
      pointObj.centerPoint = lt.LeadPointD.create(1 * inch, 1 * inch); 
      // Set the radius 
      pointObj.radius = lt.LeadLengthD.create(75); 
      // Hide the picture 
      pointObj.showPicture = false; 
      // Add the object to the automation container 
      automation.container.children.add(pointObj); 
      // Select the object 
      automation.selectObject(pointObj); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   _automation = null; 
   // Image viewer 
   _viewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/v200/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   run(callback) { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect"); 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name = automationObj.name; 
         const id = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
<!doctype html> 
<html lang="en"> 
<title>AnnObject Example | AnnPoint</title> 
 
<head> 
   <script src="https://code.jquery.com/jquery-2.2.4.min.js" 
      integrity="sha256-BbhdlvQf/xTY9gja0Dq3HiwQF8LaCRTXxZKRutelT44=" crossorigin="anonymous"></script> 
 
   <script src="../../LT/Leadtools.js"></script> 
   <script src="../../LT/Leadtools.Controls.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Engine.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Designers.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Rendering.Javascript.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Automation.js"></script> 
   <script src="../../LT/Leadtools.Annotations.BatesStamp.js"></script> 
   <script src="../../LT/Leadtools.Demos.js"></script> 
   <script src="../../LT/Leadtools.Demos.Annotations.js"></script> 
   <style> 
      #imageViewerDiv { 
         border: 1px solid #000000; 
         width: 800px; 
         height: 800px; 
         background-color: #7F7F7F; 
      } 
   </style> 
   <!-- All demo files are bundled and appended to the window --> 
   <script src="../../bundle.js" type="text/javascript"></script> 
</head> 
 
<body> 
   <p>Either Pan/Zoom or Annotations mode. In annotations mode, draw new objects or edit them.</p> 
   <div> 
      <select id="currentObjectIdSelect"></select> 
   </div> 
   <div> 
      <input type="button" id="exampleButton" value="Example" /> 
      <label id="exampleLabel" /> 
   </div> 
   <div id="imageViewerDiv" /> 
</body> 
 
<script> 
   window.onload = () => new window.examples.AnnObjects.AnnPoint(); 
</script> 
</html> 

Requirements

Target Platforms

Help Version 20.0.2019.10.14
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2019 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Annotations.Engine Assembly