hyperlink Property

Summary

Gets or sets a string which represents the hyperlink for this AnnObject.

Syntax
TypeScript
JavaScript
Object.defineProperty(AnnObject.prototype, 'hyperlink', 
	get: function(), 
	set: function(value) 
) 
hyperlink: string; 

Property Value

The hyperlink for this AnnObject. The default value is null.

Remarks

The hyperlink of an object can be any string value or null. It is up to the user's application to determine how to use this value.

Example

This example will create two annotation objects with hyperlinks and add them to a container, switches to run mode and run the hyperlink when the object is clicked.

Hyperlink.ts
EngineHelper.ts
Hyperlink.js
EngineHelper.js
Hyperlink.html
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObject_Hyperlink { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.link); 
   } 
 
   link = (automation: lt.Annotations.Automation.AnnAutomation) => { 
      const inch: number = 720.0; 
 
      // Get the container 
      const container: lt.Annotations.Engine.AnnContainer = automation.container; 
 
      // Add a red on green rectangle from 1in 1in to 2in 2in 
      let rectObj: lt.Annotations.Engine.AnnRectangleObject = new lt.Annotations.Engine.AnnRectangleObject(); 
      rectObj.rect = lt.LeadRectD.create(1 * inch, 1 * inch, 1 * inch, 1 * inch); 
      rectObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("red"), lt.LeadLengthD.create(1)); 
      rectObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("green"); 
      // Set its hyperlink 
      rectObj.hyperlink = "https://www.leadtools.com"; 
      // Add it to the container 
      container.get_children().add(rectObj); 
 
      // Add a blue on yellow rectangle from 3in 3in to 4in 4in 
      rectObj = new lt.Annotations.Engine.AnnRectangleObject(); 
      rectObj.rect = lt.LeadRectD.create(3 * inch, 3 * inch, 1 * inch, 1 * inch); 
      rectObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("blue"), lt.LeadLengthD.create(1)); 
      rectObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("yellow"); 
      rectObj.hyperlink = "https://www.leadtools.com/downloads/demos.htm"; 
      // Add it to the container 
      container.children.add(rectObj); 
 
      // Subscribe to the Run event of the automation 
      automation.add_run((sender, e) => { 
         // e is of type AnnRunDesignerEventArgs 
         // Check for status == End 
         if (e.operationStatus == lt.Annotations.Engine.AnnDesignerOperationStatus.end) { 
            // Get the annotation object 
            const annObj = e.object; 
            // Get its hyperlink string 
            const hyperlink = annObj.hyperlink; 
            // Browse to it 
            if (hyperlink != "" && hyperlink != null) { 
               alert("Opening\n" + hyperlink); 
               const winObj = window.open(hyperlink); 
               if (winObj == null || typeof winObj == "undefined") { 
                  alert("Your Popup Blocker has blocked saving the annotation file to your disk. Disable the Popup Blocker for this web site and try again."); 
               } 
            } 
         } 
      }); 
 
      // Switch to run mode 
      automation.manager.userMode = lt.Annotations.Engine.AnnUserMode.run; 
 
      alert("Run mode, click on the rectangles to go to their hyperlinks"); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   protected _automation: lt.Annotations.Automation.AnnAutomation = null; 
   // Image viewer 
   protected _viewer: lt.Controls.ImageViewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/v200/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   public run(callback?: (automation: lt.Annotations.Automation.AnnAutomation, viewer: lt.Controls.ImageViewer) => void): void { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions: lt.Controls.ImageViewerCreateOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer: lt.Controls.ImageViewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom: lt.Controls.ImageViewerPanZoomInteractiveMode = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl: lt.Demos.Annotations.ImageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode: lt.Demos.Annotations.AutomationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine: lt.Annotations.Rendering.AnnHtml5RenderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager: lt.Annotations.Automation.AnnAutomationManager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect") as HTMLSelectElement; 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount: number = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj: lt.Annotations.Automation.AnnAutomationObject = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name: string = automationObj.name; 
         const id: string = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id: number = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId: number = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id: number = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation: lt.Annotations.Automation.AnnAutomation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container: lt.Annotations.Engine.AnnContainer = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider: lt.Demos.Annotations.CanvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObject_Hyperlink { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.link); 
   } 
 
   link = (automation) => { 
      const inch = 720.0; 
 
      // Get the container 
      const container = automation.container; 
 
      // Add a red on green rectangle from 1in 1in to 2in 2in 
      let rectObj = new lt.Annotations.Engine.AnnRectangleObject(); 
      rectObj.rect = lt.LeadRectD.create(1 * inch, 1 * inch, 1 * inch, 1 * inch); 
      rectObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("red"), lt.LeadLengthD.create(1)); 
      rectObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("green"); 
      // Set its hyperlink 
      rectObj.hyperlink = "https://www.leadtools.com"; 
      // Add it to the container 
      container.get_children().add(rectObj); 
 
      // Add a blue on yellow rectangle from 3in 3in to 4in 4in 
      rectObj = new lt.Annotations.Engine.AnnRectangleObject(); 
      rectObj.rect = lt.LeadRectD.create(3 * inch, 3 * inch, 1 * inch, 1 * inch); 
      rectObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("blue"), lt.LeadLengthD.create(1)); 
      rectObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("yellow"); 
      rectObj.hyperlink = "https://www.leadtools.com/downloads/demos.htm"; 
      // Add it to the container 
      container.children.add(rectObj); 
 
      // Subscribe to the Run event of the automation 
      automation.add_run((sender, e) => { 
         // e is of type AnnRunDesignerEventArgs 
         // Check for status == End 
         if (e.operationStatus == lt.Annotations.Engine.AnnDesignerOperationStatus.end) { 
            // Get the annotation object 
            const annObj = e.object; 
            // Get its hyperlink string 
            const hyperlink = annObj.hyperlink; 
            // Browse to it 
            if (hyperlink != "" && hyperlink != null) { 
               alert("Opening\n" + hyperlink); 
               const winObj = window.open(hyperlink); 
               if (winObj == null || typeof winObj == "undefined") { 
                  alert("Your Popup Blocker has blocked saving the annotation file to your disk. Disable the Popup Blocker for this web site and try again."); 
               } 
            } 
         } 
      }); 
 
      // Switch to run mode 
      automation.manager.userMode = lt.Annotations.Engine.AnnUserMode.run; 
 
      alert("Run mode, click on the rectangles to go to their hyperlinks"); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   _automation = null; 
   // Image viewer 
   _viewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/v200/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   run(callback) { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect"); 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name = automationObj.name; 
         const id = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
<!doctype html> 
<html lang="en"> 
<title>AnnObject Example | Hyperlink</title> 
 
<head> 
   <script src="https://code.jquery.com/jquery-2.2.4.min.js" 
      integrity="sha256-BbhdlvQf/xTY9gja0Dq3HiwQF8LaCRTXxZKRutelT44=" crossorigin="anonymous"></script> 
 
   <script src="../LT/Leadtools.js"></script> 
   <script src="../LT/Leadtools.Controls.js"></script> 
   <script src="../LT/Leadtools.Annotations.Engine.js"></script> 
   <script src="../LT/Leadtools.Annotations.Designers.js"></script> 
   <script src="../LT/Leadtools.Annotations.Rendering.Javascript.js"></script> 
   <script src="../LT/Leadtools.Annotations.Automation.js"></script> 
   <script src="../LT/Leadtools.Annotations.BatesStamp.js"></script> 
   <script src="../LT/Leadtools.Demos.js"></script> 
   <script src="../LT/Leadtools.Demos.Annotations.js"></script> 
   <style> 
      #imageViewerDiv { 
         border: 1px solid #000000; 
         width: 800px; 
         height: 800px; 
         background-color: #7F7F7F; 
      } 
   </style> 
   <!-- All demo files are bundled and appended to the window --> 
   <script src="../../bundle.js" type="text/javascript"></script> 
</head> 
 
<body> 
   <p>Either Pan/Zoom or Annotations mode. In annotations mode, draw new objects or edit them.</p> 
   <div> 
      <select id="currentObjectIdSelect"></select> 
   </div> 
   <div> 
      <input type="button" id="exampleButton" value="Example" /> 
      <label id="exampleLabel" /> 
   </div> 
   <div id="imageViewerDiv" /> 
</body> 
 
<script> 
   window.onload = () => new window.examples.AnnObject.Hyperlink(); 
</script> 
</html> 

Requirements

Target Platforms

Help Version 20.0.2020.3.31
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2020 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Annotations.Engine Assembly