GetFunctionalLookupTable Method

Visual Basic
C#
WinRT C#
WinRT JavaScript
C++

public static void GetFunctionalLookupTable( 
   int[] lookupTable,
   int start,
   int end,
   int factor,
   FunctionalLookupTableFlags flags
)

'Declaration
 
Public Shared Sub GetFunctionalLookupTable( _
   ByVal lookupTable() As Integer, _
   ByVal start As Integer, _
   ByVal end As Integer, _
   ByVal factor As Integer, _
   ByVal flags As FunctionalLookupTableFlags _
)

'Usage
 
Dim lookupTable() As Integer
Dim start As Integer
Dim end As Integer
Dim factor As Integer
Dim flags As FunctionalLookupTableFlags
 
EffectsUtilities.GetFunctionalLookupTable(lookupTable, start, end, factor, flags)

public static void GetFunctionalLookupTable( 
   int[] lookupTable,
   int start,
   int end,
   int factor,
   FunctionalLookupTableFlags flags
)

 function Leadtools.ImageProcessing.Effects.EffectsUtilities.GetFunctionalLookupTable( 
   lookupTable ,
   start ,
   end ,
   factor ,
   flags 
)

public:
static void GetFunctionalLookupTable( 
   array<int>^ lookupTable,
   int start,
   int end,
   int factor,
   FunctionalLookupTableFlags flags
)

Parameters

lookupTable: Lookup table array to be filled by this method. The user must set the first and the last element of the lookup table manually (i.e. lookupTable[0] = firstValue; lookupTable[tableSize - 1] = lastValue;), if you set the first element to last value and the last element to the first value then the lookup table will become inverted.
start: Index of the first entry in the lookup table to update. The indices of the table correspond to the intensity values. If this parameter has a negative value the corresponding index to lookupTable is equal to its value + its length. The range of its possible value is between (-lookupTable length/2) and (lookupTable length/2 - 1).
end: Index of the last entry in the lookup table to update. The indices of the table correspond to the intensity values. If this parameter has a negative value the corresponding index to lookupTable is equal to its value + its length. The range of its possible value is between (-lookupTable length/2) and (lookupTable length/2 - 1).
factor: Value that indicates the factor to be applied in the function operation specified in the flags parameter. This parameter is used only if flags is set to FunctionalLookupTableFlags.Exponential, FunctionalLookupTableFlags.Sigmoid or FunctionalLookupTableFlags.Logarithm. If FunctionalLookupTableFlags.Exponential or FunctionalLookupTableFlags.Sigmoid is set, the value of this parameter can be any integer (+/-). If FunctionalLookupTableFlags.Logarithm is set, its value should be >= 0. However, if factor = 0, the lookup table will be filled linearly from start to end, regardless of the value set in flags.
flags: Flags that indicate the function used to update the lookup table and whether or not the lookupTable should contain signed or unsigned data.

This method will update the lookup table array using the predefined function specified in the flags parameter. In most cases, this method is used with Leadtools.ImageProcessing.Color.RemapIntensityCommand.
The factor parameter is used for logarithm, exponential and sigmoid functions only. If factor = 0, the method performs a linear interpolation between the two points start and end and stores the results in the lookup table, regardless of the value set in flags.

If flags parameter is set to FunctionalLookupTableFlags.Exponential, the value of factor modifies the lookup table values (see figure below) according to the following equations:

Y	=	YStart	+	(YEnd - YStart) * (Exp ((factor/10.0 * (x-start))/(end-start)) - firstValue)
				(lastValue - firstValue)

YStart = The lookupTable value at start.
YEnd = The lookupTable value at end.
firstValue = Exp(0).
lastValue = Exp(factor)
x = the intensity value of the selected point

If the flags parameter is set to FunctionalLookupTableFlags.Logarithm, the value of factor modifies the lookup table values (see figure below) according to the following equations:

Y	=	YStart	+	(YEnd - YStart) * (Log (1 + (factor/10.0 * (x-start))/(end- start)) - firstValue)
				(lastValue - firstValue)

YStart = The lookupTable value at start.
YEnd = The lookupTable value at end.
firstValue = 0.
lastValue = Log(1 + nFactor).
x = the intensity value of the selected point

If the flags parameter is set to FunctionalLookupTableFlags.Sigmoid, the value of factor modifies the lookup table values (see figure below) according to the following equations:

Y	=	YStart	+	(YEnd - YStart) * (1.0/ (1 + Exp(2factor/10.0 (x-center))/(end- start)) - firstValue)
				(lastValue - firstValue)

YStart = The lookupTable value at start.
YEnd = The lookupTable value at end.
firstValue = 1.0/(1 + Exp(2.0 * factor/10.0 *(start - center)/ (end- start))).
lastValue = Log(1 + factor).
x = the intensity value of the selected point

If the flags parameter is set to FunctionalLookupTableFlags.Linear, factor is ignored. The method performs a linear interpolation between the two points (start, YStart) and (end, YEnd) and stores the results in the lookup table.
where:

YStart = The lookupTable value at start.

YEnd = The lookupTable value at end.
If the value of (end - start) exceed the lookupTable length, the method will throw an exception.
As an example, suppose a user wants to select a point, change the intensity value of that point (x), and then perform two linear interpolations:
- from 0 to the intensity value x
- from intensity value x to the end of the range
To accomplish this, the user would proceed by doing the following:
- Select the point and get its intensity value (x).
- Change the intensity value of the selected point to some new value (newIntensity).
- Store the new intensity value in the Lookup table by assignment:
  lookupTable[0] = 0;
  lookupTable[x] = newIntensity;
- Call GetFunctionalLookupTable with start set to 0, end set to x, and flags set to FunctionalLookupTableFlags.Linear.
- Call GetFunctionalLookupTable with start set to x, end set to 255, and flags set to FunctionalLookupTableFlags.Linear. (For the example, assume the image is 8-bits per pixel.)
- For another example, please refer to the example for Leadtools.ImageProcessing.Color.RemapIntensityCommand.

Visual Basic
C#
WinRT C#
WinRT JavaScript
Silverlight C#
Silverlight VB

Public Sub GetFunctionalLookupTableExample()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True

   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"))

   ' Prepare the command
   Dim LookupTable() As Integer
   ReDim LookupTable(255)
   LookupTable(0) = 0
   LookupTable(255) = 255
   EffectsUtilities.GetFunctionalLookupTable(LookupTable, 0, 255, 5, FunctionalLookupTableFlags.Exponential)

   Dim command As RemapIntensityCommand = New RemapIntensityCommand
   command.Flags = RemapIntensityCommandFlags.Master
   command.LookupTable = LookupTable
   command.Run(leadImage)
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

End Sub

Public NotInheritable Class LEAD_VARS
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class

public void GetFunctionalLookupTableExample()
   {
      // Load an image
      RasterCodecs codecs = new RasterCodecs();
      codecs.ThrowExceptionsOnInvalidImages = true;

      RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"));

      // Prepare the command
      int[] LookupTable = new int[256];
      LookupTable[0] = 0;
      LookupTable[255] = 255;
      EffectsUtilities.GetFunctionalLookupTable(LookupTable, 0, 255, 5, FunctionalLookupTableFlags.Exponential);

      RemapIntensityCommand command = new RemapIntensityCommand();
      command.Flags = RemapIntensityCommandFlags.Master;
      command.LookupTable = LookupTable;
      command.Run(image);
      codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

   }

static class LEAD_VARS
{
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}

[TestMethod]
public async Task GetFunctionalLookupTableExample()
{
   // Load an image
   RasterCodecs codecs = new RasterCodecs();
   codecs.ThrowExceptionsOnInvalidImages = true;
   // Load the image
   string srcFileName = @"Assets\Image1.cmp";
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName);
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile));

   // Prepare the command
   int[] LookupTable = new int[256];
   LookupTable[0] = 0;
   LookupTable[255] = 255;
   int[] retLookupTable = EffectsUtilities.GetFunctionalLookupTable(LookupTable, 0, 255, 5, FunctionalLookupTableFlags.Exponential);

   RemapIntensityCommand command = new RemapIntensityCommand();
   command.Flags = RemapIntensityCommandFlags.Master;
   command.LookupTable = retLookupTable;
   command.Run(image);
   //Save as BMP
   string destFileName = @"result.bmp";
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName);
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Bmp, 24);

}

public void GetFunctionalLookupTableExample(RasterImage image, Stream outStream)
{
   // Prepare the command
   int[] LookupTable = new int[256];
   LookupTable[0] = 0;
   LookupTable[255] = 255;
   EffectsUtilities.GetFunctionalLookupTable(LookupTable, 0, 255, 5, FunctionalLookupTableFlags.Exponential);
   RemapIntensityCommand command = new RemapIntensityCommand();
   command.Flags = RemapIntensityCommandFlags.Master;
   command.LookupTable = LookupTable;
   command.Run(image);
   // Save result image
   RasterCodecs codecs = new RasterCodecs();
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24);
   image.Dispose();
}

Public Sub GetFunctionalLookupTableExample(ByVal image As RasterImage, ByVal outStream As Stream)
   ' Prepare the command
   Dim LookupTable As Integer() = New Integer(255){}
   LookupTable(0) = 0
   LookupTable(255) = 255
   EffectsUtilities.GetFunctionalLookupTable(LookupTable, 0, 255, 5, FunctionalLookupTableFlags.Exponential)
   Dim command As RemapIntensityCommand = New RemapIntensityCommand()
   command.Flags = RemapIntensityCommandFlags.Master
   command.LookupTable = LookupTable
   command.Run(image)
   ' Save result image
   Dim codecs As RasterCodecs = New RasterCodecs()
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24)
   image.Dispose()
End Sub

Target Platforms: Windows 7, Windows Vista SP1 or later, Windows XP SP3, Windows Server 2008 (Server Core not supported), Windows Server 2008 R2 (Server Core supported with SP1 or later), Windows Server 2003 SP2

Reference

EffectsUtilities Class
EffectsUtilities Members
Leadtools.ImageProcessing.Color.RemapIntensityCommand
Leadtools.ImageProcessing.Core.ApplyVoiLookupTableCommand
Leadtools.ImageProcessing.Color.AdjustTintCommand
Leadtools.ImageProcessing.Color.GammaCorrectExtendedCommand