ILMAFlangerDisp Interface

Properties:

Type

Name

Description

long

DryMix

Controls the level of unprocessed signals. Adjust to control the pass-through volume of the unprocessed signal.

long

WetMix

Controls the level of processed signals. Adjust to control the mixed amount of the processed signal.

long

Delay

Controls the level of flange, increased values will result in an increase in the delay time.

long

Feedback

Feedback of the repeated signal, by default from -100 to 100. Zero feedback will result in only a single repeat, while nonzero feedback settings will generate numerous repeats.

long

Rate

Refers to the rate at which the LFO waveform repeats itself. By increasing the speed, the flanger will have to sweep through the depth in less time.

long

Sweep

The sweep depth determines how wide the sweep is in terms of delay time - essentially the width of the LFO. This sweep depth is the maximum additional delay that is added to the signal in addition to the delay in the Delay property.

long

Stereo

Represent the phase difference between the left and right channel.

VARIANT_BOOL

Enabled

Indicates weather Flange effect is enabled (VARIANT_TRUE) or not (VARIANT_FALSE).

long

DefaultDryMix

Default Dry Mix value.

Original default value is 70.

long

DefaultWetMix

Default Wet Mix value.

Original default value is 50.

long

DefaultDelay

Default delay value.

Original default value is 500.

long

DefaultFeedback

Default feedback value

Original default value is 25.

long

DefaultRate

Default rate value

Original default value is 5.

long

DefaultSweep

Default sweep value

Original default value is 10.

long

DefaultStereo

Default stereo value

Original default value is 90.

VARIANT_BOOL

DefaultEnabled

Default for bEnabled value

Original default value is VARIANT_TRUE.

long

NumChannels

Number of channels per sample of the current media format.